Vemer Dafne User Manual page 25

With this menu it's possible to modify the programs of the automatic operation.
P2 on Saturday and on Sunday (the programs profiles are described at the end of this
manual on page 43-44).
If this programming doesn't satisfy the user needs it's possible to change it.
To modify the programming:
symbol
access the parameters modification.
3. The programs page is displayed:
the current program (for example P1) of the
current operation mode (
profile that corresponds to the program.
3.1. If the set program is good, move to the
next day with the keys
3.2. If the set program is not good, press
the key .
program different among the 7 available
by pressing the keys
3.2.1. If no program exactly satisfies the
user's needs, choose the program
which best meets them and
press the key
modification of the program profile.
On field
on field
level (T1, T2 or T3) set for that
specific time (00:00).
until the symbol
or ) and the
and .
and .
to access the
00:00 appears while
- 23 -
Dafne programmable thermostat, user's manual
until the
to