Programmed Play - Sharp CD-E600H Operation Manual

" Programmed play

You can choose up to 32 selections for playback in the order you
like.
1
Whilst in the stop mode, press
one of the 1 - 3 buttons on
the remote control to select
the desired disc.
2
Press the direct search but-
tons on the remote control to
select the desired track.
Selected track number
You can also select a track by pressing the
button.
3
Press the MEMORY/SET (MEMORY) button to save the
track number.
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
5
Press the / button to start playback.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the
CD to the stop mode and then press the
CLEAR button.
Each time the button is pressed, one track will
Selected disc number
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
or
Notes:
! Opening the disc tray automatically cancels the programmed
sequence.
! Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
! During programme operation, random play is not possible.
Playback order
02/12/24 CD-E600H(H)E2.fm
CD-E600H
ENGLISH
8
E-14