Programmed Play - Sharp CP-BH250 Operation Manual

Listening to a CD or MP3 disc (continued)

■ Programmed play

You can choose up to 32 selections for playback in the
order you like.
While in the stop mode, press the MEMORY button to
1
enter the programming save mode.
Press one of the
2
desired disc.
For MP3, follow step 3
below.
For CD, skip to step 4
below.
Press the PRESET (
3
control to select the desired folder.
4
Press or
track.
Press the MEMORY button to save the track number.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks
6
can be programmed.
Press the button to start playback.
7
To check the programmed track, during stop mode,
press the MEMORY button repeatedly. The undesired
programmed tracks can be cleared by pressing the
CLEAR button
To cancel the programmed play mode:
During programmed stop mode, press the
display will show "MEM CLEAR" and all the programmed
contents will be cleared.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY"
indicator will be displayed. During stop mode, press the
MEMORY button once. Within 10 seconds, press and hold
the MEMORY button again. Then follow steps 2 - 4 to add
tracks.
Notes:
● When a disc is ejected, the program is automatically
canceled.
● If you press the ON/STANDBY button to enter the
standby mode or change the function from CD to
another, the programmed selections will be cleared.
● During the program operation, random play is not
possible.
5 buttons to select the
1 -
MP3 Indicator
) button on the remote
or
button to select the desired
button. The
■ Procedure to playback MP3 disc with
folder mode on
To play back CD-R/RW.
In CD function, load an MP3 disc. Press the FOLDER
1
button and disc info will be displayed.
MP3 indicator
Total number of files
Press the PRESET (
2
playback folder. (Folder mode on)
FOLDER
indicator
Select desired file to be played back by pressing the
3
or
Press the / button. Playback will start and file name
4
will be displayed.
● Title, Artist and Album name are displayed if they
are recorded on the disc.
● In case of playback with the folder mode on, press
the PRESET (
be selected even though it is in playback/pause
mode. It will continue playback/pause mode in the
1st track of the selected folder.
● Display content can be changed by pressing the
DISPLAY button.
File name display
Counter display
Album display
Note:
If "NO SUPPORT" is displayed, it means "Not supported
playback file" is selected.
E-13
TOTAL indicator
) button to select desired
or
First track number in
the folder
button.
or ) button, and the folder can
Folder display
Title display
Artist display