Enhancing Your System - Sharp CD-E600H Operation Manual

Enhancing your system

The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
VCR, DVD, etc.
White
Red White
RCA lead
(not supplied)
! Listening to the playback sounds from VCR,
DVD, etc.
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
4
Play the connected equipment.
Note:
To prevent noise interference, place this unit away from a television.
! To record on a tape
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE (TAPE-2
4
To the line Press the /
output sockets
5
Play the VCR, DVD, etc.
Red
! Headphones
" Before plugging in or unplugging the headphones, reduce the
volume.
" Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
" Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME buttons.
02/12/24
) button.
button.
CD-E600H(H)E3.fm
CD-E600H
ENGLISH
8
E-28