Programmed Play - Sharp XL-DV484W Operation Manual

Hide thumbs Also See for XL-DV484W:
Table of Contents

Advertisement

XL-DV484W

Programmed play

XL-DV555W
ENGLISH
Chapter programmed play
H
You can choose up to 24 favourite chapters for playback in the order you like
using this function. (Title cannot be programmed)
1
Whilst a disc is stopped,
press the MEMORY/DIMMER
button
to
display
the
programme screen.
2
Use the cursor ▲ or ▼ button
to select the desired title and
then press the ENTER button.
3
Use the cursor ▲ or ▼ button to select the desired chapter
and then press the ENTER button.
I Selected chapter will be in the confirmation area.
I Repeat steps 2-3 for another chapter.
I To clear the programmed chapter, press the cursor 0, ▲ or ▼ button
to select a number in confirmation area and press the CLEAR/
DISPLAY button. Press the cursor 1 button to go back to the
selection area.
I To clear all programmes, press and hold down the CLEAR/DISPLAY
button for more than 3 seconds in the confirmation area.
4
Press the 0 button to start playback.
Adding chapters into the programme:
Follow steps 1 - 3. The new chapter number will be added after the last number
of the original programme.
E-41
*DV484W_EP38-42
41
Notes:
I Direct search buttons can be used to select the title and chapter.
I Disc without a title or chapter registered cannot be programmed.
I To programme other chapters sequentially, use the direct search buttons to
select and press the ENTER button.
I Programming is not possible during playback or in the pause mode.
I To discontinue the programme, press the MEMORY/DIMMER button.
I To play the same programme continuously, press the MEMORY/DIMMER
button and then press the 0 button.
I Chapters from different titles cannot be programmed at the same time.
Cursor
Selection area Confirmation area
XL-DV484W(Z)
TINSZA032AWZZ
04.2.20, 17:25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl-dv555w

Table of Contents