Sharp CD-ES600 Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Stereo System
  5. CD-ES600
  6. Service manual

Sharp CD-ES600 Service Manual

Mini component system
Hide thumbs Also See for CD-ES600:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual
[1]
Specifications ......................................... . ....... 1-1
[2]
Names of parts....................................... . ....... 1-2
[1]
Mechanism section ................................ . ....... 2-1
[2]
Tuner section ......................................... . ....... 2-1
[3]
CD section.............................................. . ....... 2-2
[4]
CD Changer mechanism section ........... . ....... 2-3
CHAPTER 3. MECHANISM BLOCKS
[1]
Caution on disassembly ......................... . ....... 3-1
[2]
[1]
Block diagrams....................................... . ....... 4-1
[1]
Notes on schematic diagram.................. . ....... 5-1
[2]
Types of transistor and LED................... . ....... 5-1
[3]
Waveforms of CD circuit ........................ . ....... 5-2
[4]
Voltage ................................................... . ....... 5-3
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for
maintaining the safety and performance of the set.
SERVICE MANUAL
CONTENTS

SHARP CORPORATION

No. S2404CDES600/
MINI COMPONENT SYSTEM
CD-ES600
MODEL
CD-ES600 Mini Component System consisting of CD-ES600
(main unit) and CP-ES600 (speaker system).
CD-ES66
MODEL
CD-ES66 Mini Component System consisting of
CD-ES66 (main unit) and CP-ES66 (speaker sys-
tem).
In the interests of user-safety the set should be restored to its
original condition and only parts identical to those specified be
used.
[1]
Schematic diagram........................................6-1
[2]
Wiring side of P.W.Bord ...............................6-10
[1]
Troubleshooting .............................................7-1
[1]
Function table of IC .......................................8-1
[2]
FL Display.................................................... 8-11
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
CD-ES600/CD-ES66

Advertisement

Table of Contents
loading

Related Manuals for Sharp CD-ES600

Summary of Contents for Sharp CD-ES600

  • Page 1: Table Of Contents

    CD-ES600/CD-ES66 SERVICE MANUAL No. S2404CDES600/ MINI COMPONENT SYSTEM CD-ES600 MODEL CD-ES600 Mini Component System consisting of CD-ES600 (main unit) and CP-ES600 (speaker system). CD-ES66 MODEL CD-ES66 Mini Component System consisting of CD-ES66 (main unit) and CP-ES66 (speaker sys- tem). In the interests of user-safety the set should be restored to its original condition and only parts identical to those specified be used.
  • Page 2 CD-ES600/CD-ES66 IMPORTANT SERVICE NOTES BEFORE RETURNING THE AUDIO PRODUCT BEFORE RETURNING THE AUDIO PRODUCT (Fire & Shock Hazard) Before returning the audio product to the user, perform the following safety checks. VTVM 1. Inspect all lead dress to make certain that leads are not pinched or...

  • Page 3: Chapter 1. General Description

    CD-ES600/CD-ES66 CD-ES600/CD-ES66 Service Manual CD-ES600/CD-ES66 Market CHAPTER 1. GENERAL DESCRIPTION [1] Specifications FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL. CD-ES600/CD-ES66 General Tuner Power source AC 120 V, 60 Hz Frequency range FM: 87.5 - 108.0 MHz...

  • Page 4: Names Of Parts

    CD-ES600/CD-ES66 [2] Names of parts CD-ES600/CD-ES66 Front panel 1. Disc Trays 2. Timer Indicator 3. Power On/Stand-by Button 4. CD Track Up or Fast Forward, Tape 2 Fast Forward, Tuner Preset Up, Time Up Button 5. Clock/Timer Button 6. Tuning Up Button 7.

  • Page 5: Remote Control

    CD-ES600/CD-ES66 CD-ES600/CD-ES66 Remote control 1. Remote Control Transmitter 2. Disc Number Select Buttons 3. CD Clear/Dimmer Button 4. Memory/Set Button 5. CD Random Button 6. CD Track Down or Fast Reverse, Tape 2 Rewind, Tuner Preset Down, Time Down Button 7.

  • Page 6: Chapter 2. Adjustments

    CD-ES600/CD-ES66 CD-ES600/CD-ES66 Service Manual CD-ES600/CD-ES66 Market CHAPTER 2. ADJUSTMENTS • FM RF Signal generator: 1 kHz, 40 kHz dev., FM modulated [1] Mechanism section Test Frequency Frequency Setting/ Instrument Stage Display Adjusting Connection • Driving Force Check Point FM Band —...

  • Page 7: Cd Section

    CD-ES600/CD-ES66 [3] CD section CD Error code description Error Explanation When Pickup set inner position, inner switch cannot detect 'ON' level for 10 secs. CAM error. Can't detect CAM switch when CAM is moving. When it detect cam operation error during initialize pro- cess.

  • Page 8: Cd Changer Mechanism Section

    CD-ES600/CD-ES66 [4] CD Changer mechanism section • A number in the drawing sheet is the number of the parts guide (CHANGER MECHANISM PARTS). HALF GEAR MUST ARRANGE AS SHOWN 2 – 3...
  • Page 9 CD-ES600/CD-ES66 APPLY SANKOL BEFORE FIX FIX ITEM 1 ACCORDING TO THE SHOWN PICTURE ABOVE ROTATE MODE BIG GEAR UNTIL REACH AS SHOWN IN PICTURE 2 – 4...
  • Page 10 CD-ES600/CD-ES66 APPLY GREASE PULL THE LEVER UNITIL REACH THE ARROW MARK 2 – 5...
  • Page 11 CD-ES600/CD-ES66 FIGURE 2 FIGURE 1 APPLY GREASE SLOT CLAMP SW AM INSIDE BASE SLOT 2 – 6...
  • Page 12 CD-ES600/CD-ES66 APPLY GREASE AT BOTTOM SIDE OF GEAR FOLLOW MARKING NO NEED APPLY GREASE AT BOTTOM SIDE APPLY GREASE AT TOP SIDE OF GEAR FOLLOW MARKING OTHER THAN FIGURE 1 DIRECTION ALL N.G BLACK MARK FIGURE 1 2 – 7...
  • Page 13 CD-ES600/CD-ES66 APPLY GREASE AT HALF GEAR AREA ROTATE CLOCKWISE UNTIL REACH HERE (MAXIMUM) 2 – 8...
  • Page 14 CD-ES600/CD-ES66 CHANGE COLOR TO BLACK 2 – 9...
  • Page 15 CD-ES600/CD-ES66 TRAY BIG GEAR MUST FREE FROM GREASE THE SHOWN AREA CHANGE COLOR TO BLACK O . K GREASE APPLICATION LENGTH GREASE APPLICATION PORTION N . G TRAY BIG GEAR CHANGE COLOR TO BLACK SHOWN HOLE MUST FACING ARROW DIRECTION...
  • Page 16 CD-ES600/CD-ES66 APPLY GREASE AT BOTTOM SIDE ONLY TR-RE JOINT GEAR C APPLY GREASE ONLY AT TOP SIDE GEAR MUST FIX ACCORDING TO THE HOLE'S 2 – 11...
  • Page 17 CD-ES600/CD-ES66 2 – 12...
  • Page 18 CD-ES600/CD-ES66 APPLY GREASE WHEN FIXING ITEM 2 MUST FOLLOW AS SHOWN 2 – 13...
  • Page 19 CD-ES600/CD-ES66 FIGURE 1 FIGURE 2 APPLY GREASE APPLY GREASE SC141 FIGURE 3 2 – 14...
  • Page 20 CD-ES600/CD-ES66 ITEM 2 , 3 MUST APPLY GREASE ON TOP SIDE GEAR ONLY GEAR 112 GEAR 112 O . K N . G TOP VIEW AFTER FIX REVERSE N.G ASSY 2 – 15...
  • Page 21 CD-ES600/CD-ES66 APPLY GREASE BEFORE FIX MOVE UNTIL TOUCH DURING GEAR A ROTATE MUST PRESS SHOWN AREA AND LEVER B WILL MOVE ARROW DIRECTION THEN FIX ITEM 1 . 803 x6 APPLY GREASE CONFIRM WHETHER FIXED PROPELY OR NOT 2 – 16...
  • Page 22 CD-ES600/CD-ES66 APPLY GREASE BEHIND THE LEVER NEED TO APPLY GREASE PULL IT THEN LEVER WILL MOVE IN 2 – 17...
  • Page 23 CD-ES600/CD-ES66 APPLY GREASE APPLY GREASE BEFORE FIX APPLY GREASE AT BOSS SPRING MUST ARRANGE UNDER THE HOOK O.K LR JOINT LEV BOARD R LR JOINT LEV BOARD R 2 – 18...
  • Page 24 CD-ES600/CD-ES66 ASSY REVERSELY N.G APPLY GREASE BIG SLOT MUST FACING OUT WHEN FIX & AFTER FIX TO BASE CHASSIS AFTER ASSY CONFIRM THE FREE DROP GEAR POSITION DURING FIXING 2 – 19...
  • Page 25 CD-ES600/CD-ES66 ASSY REVERSELY N.G APPLY GREASE BIG SLOT MUST FACING OUT WHEN FIX & AFTER FIX TO BASE CHASSIS AFTER ASSY CONFIRM THE FREE DROP GEAR POSITION DURING FIXING CONFIRM BOTH GEAR SIT PROPELY & LOCKED 2 – 20...
  • Page 26 CD-ES600/CD-ES66 AFTER FIX OUTER UP/DOWN LEVER HOLD SHOWN PORTION AND MOVE UP/DOWN THAN CONFIRM LEVER GO INSIDE THE HOLE OR NOT IF GO INSIDE HOLE IS O.K BIGGER SLOT FACING OUT IF NO GO INSIDE HOLE IS N.G BIGGER SLOT FACING OUT...
  • Page 27 CD-ES600/CD-ES66 BIG SLOT FACING OUT 2 – 22...
  • Page 28 CD-ES600/CD-ES66 PUSH THE LEVER ACCORDING TO ARROW DIRECTION THAN FIX WHEN FIX MAIN BASE ASSY FOLLOW ACCORDING TO O.K PICTURE MAKE SURE MECHA HOLDER SHAFT FIX PROPELY TO LEVER 2 – 23...
  • Page 29 CD-ES600/CD-ES66 APPLY SANKOL APPLY SANKOL ON TOP APPLY SANKOL INSIDE THE SLOT & OTHER SHOWN PORTION COSMO GUIDE TRAY HAVE MARKING AS SHOWN FIX TRAY NO 1 FIRST THAN FOLLOW OTHER APPLY SANKOL AT TRAY SLIDING PORTION 2 – 24...
  • Page 30 CD-ES600/CD-ES66 APPLY GREASE AT INNER & OUTER GEAR SLIDING PORTION WHEN FIX GEAR UP/ DOWN BOARD THE TWO LEVER MUST AT PARALLEL LINE & POSITION AT TOP MAX SIDE AFTER ASSY GEAR UP/DOWN BOARD 2 – 25...
  • Page 31 CD-ES600/CD-ES66 2 – 26...
  • Page 32 CD-ES600/CD-ES66 AFTER ASSY TOP PLATE FIX THE FFC FFC4 AFTER PUSH MAKE SURE SNAP PROPELY PRESS IN BACK PORTION AFTER FIX PUSH FOLLOW ARROW DIRECTION SLOT IN BEFORE LOCK AFTER LOCK BEFORE LOCK MUST CONFIRM AFTER LOCK BEFORE LOCK AFTER LOCK MUST CONFIRM 2 –...
  • Page 33 CD-ES600/CD-ES66 CAUTION 1. MAKE SURE NO PWB CHIP INSIDE SET .( BEFORE FIX MAKE SURE PWB NO DUST , GREASE & ETC ) 2 – 28...
  • Page 34 CD-ES600/CD-ES66 THE TWO SLOT MUST FREE FROM GREASE ASSEMBLY SEQUENCE APPLY GREASE BELOW THE MARKING FOR 1. APPLY GREASE TO MAIN BASE BOTH PORTION GREASE APPLICATION AREA ALL BOSS APPLY GREASE APPLY GREASE AT 3 HALF MOON APPLY GREASE APPLY GREASE...
  • Page 35 CD-ES600/CD-ES66 REFERENCE ONLY MOTOR GEAR HEIGHT FROM MAIN BASE 12.2 + 0.1 MOTOR SCREWING HOLE SCREW TORQUE + 0.5 MUST HAVE GAP M1,2 AFTER SCREW MOTOR,CONFIRM THE ARRANGEMENT AS IN FIGURE 2 FIGURE 2 APPLY GREASE 2 – 30...
  • Page 36 CD-ES600/CD-ES66 3.1 + 0.1 SHAFT X 3 DIM AFTER INSERTION APPLY SANKOL MUST CONFIRM EVERYDAY SANKOL APPLICATION AREA 109-2 APPLY GREASE AT THE SLIDING PORTION APPLY GREASE UP / DOWN HOLDER CHANGE TO NATURE COLOR 2 – 31...
  • Page 37 CD-ES600/CD-ES66 BEFORE MELT IT AFTER MELT IT ( MUST FLAT ) ROTATE ANTI CLOCKWISE BY JIG AFTER ASSY TO HOLDER STABILIZER NEED CLEAN ( BY HAND CANNOT X ) WITH ALCOHOL DISC TOUCHING SURFACE APPLY DIABOND CHANGE COLOR TO NATURE...
  • Page 38 CD-ES600/CD-ES66 APPLY GREASE MUST MAKE SURE SNAP PROPELY BOTH SIDE ALL SURFACE MUST TOUCH O . K 2 – 33...
  • Page 39 CD-ES600/CD-ES66 NO GAP HAVE GAP 2 – 34...

  • Page 40: Caution On Disassembly

    CD-ES600/CD-ES66 CD-ES600/CD-ES66 Service Manual CD-ES600/CD-ES66 Market CHAPTER 3. MECHANISM BLOCKS [1] Caution on diassembly Caution on Disassembly Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance: 1. Take cassette tape and compact disc out of the unit.
  • Page 41 CD-ES600/CD-ES66 (F2)x1 (K1)x4 φ3x10mm Front Panel Tape Mechanism (F1)x6 φ3x10mm Open (K2)x1 Cassette Cover Lug Wire Changer Mechanism Front Panel Unit (G2)x10 Display PWB φ2.6x10mm (L1)x4 (G1)x1 φ2.6x10mm CD Mechanism Game Input (H1)x2 φ3x10mm Changer Mechanism Unit (J1)x3 φ3x10mm (J4)x1...

  • Page 42: Tweeter

    CD-ES600/CD-ES66 CP-ES600/CP-ES66 REMOVAL PROCEDURE STEP Passive Radiator 1. Screw ...... (A1) x4 Tweeter 2. Side Panel ....(A2) x1 3. Screw ...... (A3) x4 Woofer 1. Front Panel ..... (B1) x1 2. Screw ...... (B2) x4 (C1)x2 Tweeter 1. Screw ...... (C1) x2 φ3x12mm...

  • Page 43: Removing And Reinstalling The Main Parts

    CD-ES600/CD-ES66 [2] Removing and reinstalling the main parts 1. TAPE MECHANISM SECTION Perform steps 1 to 5 and 6 of the disassembly method to remove the tape mechanism. 1.1. How to remove the record/playback and erase heads (TAPE 2) (See Fig. 1) 1.

  • Page 44: Figure

    CD-ES600/CD-ES66 2. CD MECHANISM SECTION Perform steps 1, 2, 9, 10 and 11 of the disassembly method to remove Reduction gear C the CD mechanism. 2.1. Remove the pickup. (See Fig. 1) 1. Remove the stop washer (A1) x 1 pc., to remove the gear (A2) x 1 2.
  • Page 45 CD-ES600/CD-ES66 3.2. How to Remove the tray motor/main cam motor/5- Changer Motor PWB (See Fig. 1) 1. Remove the screws (A1)x 2 pcs., to remove tray motor/main cam motor/5-Changer Motor PWB. Changer Mechanism Unit Tray Motor Main Cam Motor 5-Changer...
  • Page 46 CD-ES600/CD-ES66 — MEMO — 3 – 7...

  • Page 47: Chapter 4. Diagrams Block Diagrams

    CD-ES600/CD-ES66 CD-ES600/CD-ES66 Service Manual CD-ES600/CD-ES66 Market CHAPTER 4. DIAGRAMS [1] Block diagrams TO DISPLAY SECTION TO MAIN SECTION 10 11 12 13 14 10 11 LC78648E CD SERVO XOUT CONT 1 SLDO SPDO 32 33 FWD5 26 27 PVCC2 REV5 +3.3V...
  • Page 48 CD-ES600/CD-ES66 IC303 IC301 LA1832S TA7358AP FM IF DET./ LOOP FM FRONT END FM MPX./AM IF ANTENNA FM IF 10.7 MHz T302 CF303 BF301 CF351 X351 450 kHz B.P.F 456 kHz T351 CF352 AM IF FM L312 AM MIX AM IF...
  • Page 49 CD-ES600/CD-ES66 FL701 FL DISPLAY JOG701 LED703 32 41 VOLUME RX701 78 69 REMOTE SENSOR PHOTO Q713 IC701 VLOAD SYSTEM AVDD MICROCOMPUTER SW701-SW707 SW711-SW716 SW725-SW725 +B PROTECT 1 2 4 5 3 11 12 15 16 21 24 20 17 18 19...

  • Page 50: Chapter 5. Circuit Description

    CD-ES600/CD-ES66 CD-ES600/CD-ES66 Service Manual CD-ES600/CD-ES66 Market CHAPTER 5. CIRCUIT DESCRIPTION • The indicated voltage in each section is the one measured by Digi- tal Multimeter between such a section and the chassis with no sig- nal given. [1] Notes on schematic diagram 1.

  • Page 51: Waveforms Of Cd Circuit

    CD-ES600/CD-ES66 [3] Waveforms of CD circuit Stopped Stopped 1999/04/07 09:51:15 CH1=500 mV CH3=500 mV 500 ms/div CH1=200 mV CH2=500 mV 500 ms/div DC 10:1 DC 10:1 (500 ms/div) DC 10:1 DC 10:1 (500 ms/div) NORM:20 kS/s NORM:20 kS/s IC1 21...

  • Page 52: Voltage

    CD-ES600/CD-ES66 [4] Voltage IC301 IC601 IC701 NO. VOLTAGE NO. VOLTAGE NO. VOLTAGE NO. VOLTAGE NO. VOLTAGE NO. VOLTAGE 4.74 V 3.20 V 2.10 V 1.61V 2.20 V 4.65 V 1.61 V 2.10 V 0.29 V 1.60 V 2.20 V 0.20 V 5.10 V...

  • Page 53: Chapter 6. Circuit Schematics And Parts Layout

    CD-ES600/CD-ES66 CD-ES600/CD-ES66 Service Manual CD-ES600/CD-ES66 Market CHAPTER 6. CIRCUIT SCHEMATICS AND PARTS LAYOUT [1] Schematic diagram AM LOOP ANTENNA SO302 FM ANTENA TERMINAL CNP301 MAIN PWB-A1 (1/3) BF301 BAND PASS FILTER D305 DS1SS133 C303 C302 C315 C308 10P(CH) 0.001 0.01 FM SIGNAL 4.7P...
  • Page 54 CD-ES600/CD-ES66 MAIN PWB-A1 (1/3) FM SIGNAL BI601 R-CH PLAYBACK SIGNAL R601 A_GND R602 RECORD SIGNAL L-CH CD_GND CD SIGNAL A+5V D_GND IC601 VIDEO SIGNAL C653 C602 C601 LC75341 0.022 220P 220/16 AUDIO SIGNAL AUDIO PROCESSOR CNS601 C609 R605 1/50 C603...
  • Page 55 CD-ES600/CD-ES66 GAME INPUT PWB-B2 FW901 M_+13V SP_RLY R-CH L-CH JK691 VIDEO OUT WTM901 CNS603 D690 D691 VIDEO IN DS1SS133 DS1SS133 R693 C602 C601 L-CH 0.022 220/16 R691 C691 R603 8.2K 390P AUX/VIDEO R690 C690 8.2K 390P R-CH R692 C603 JK690...
  • Page 56 CD-ES600/CD-ES66 IC901 STK41241 POWER AMP. R903 L902 3µH Q903 KTC3875 GR R917 ZD902 ZD903 0.1(3W) 120BSB 120BSB C917 0.01 R919 R926 R925 R910 1.5K 1.5K 1.8K (1/2W) (1/2W) Q902 KTC3875 GR Q901 KTC3875 GR D905 R920 DS1SS133 1.8K C911 100/100...
  • Page 57 CD-ES600/CD-ES66 FM SIGNAL Q906 L902 KTC3203 Y 3µH D912 R949 DS1SS133 Q903 R942 390(2W) 3875 GR C931 R950 R943 390(2W) R947 10/50 MOTOR L1_OUT CNS971 R1_OUT RL914 M_+13V SP_RLY D911 C928 DS1SS133 R-CH C929 (ML) (ML) L-CH L901 L921 Q905 CNP901 3µH...
  • Page 58 CD-ES600/CD-ES66 DISPLAY PWB-A2 FL701 LED DRIVER FL DISPLAY Q710 KRC102 S 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 1 C707...
  • Page 59 CD-ES600/CD-ES66 L701 SPLAY 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 R795 C701 1/50 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100...
  • Page 60 CD-ES600/CD-ES66 CD SERVO PWB-C CD SIGNAL PICKUP UNIT 47/25 FFC1 LASER DRIVER 0.01 0.01 KTA1504 Y VREF VREF 47/25 VVDD 80 79 78 0.001 AVDD1 0.047 SLCO 0.022 EFMIN 0.0027 0.01 100P(CH) JITTC 0.056 PHLPF/RF VREF 3.3/16 CNP1 0.056 TEIN 0.01...
  • Page 61 CD-ES600/CD-ES66 FFC704 100P(CH) 0.022 CD RES 100P(CH) 100P(CH) 100P(CH) 100P(CH) 100P(CH) 0.022 DISC CLAMP 4.7K TRAY SW1 4.7K TRAY SW2 4.7K PHOTO VVDD 80 79 78 77 76 75 74 73 72 DVDD CNP5 SLCO DATA 5-CHANGER DATACK EFMIN 0027...

  • Page 62: Wiring Side Of P.w.bord

    CD-ES600/CD-ES66 [2] Wiring side of P.W.Bord MAIN PWB-A1 R124 C376 C379 R374 R136 R373 C302 C377 R378 R372 C378 C382 1 2 3 4 5 6 7 8 9 10 11 IC302 C381 R379 C387 C392 C394 L351 R377 C380...
  • Page 63 CD-ES600/CD-ES66 R124 R122 R138 R136 C134 C120 C135 C128 R132 R158 C133 C131 C126 R135 COLOR TABLE R130 C127 C129 R150 BROWN C125 R133 R131 R D ( R ) C121 FFC701 R129 ORANGE R395 R128 C143 ZD351 YELLOW P6-15 11-E...
  • Page 64 CD-ES600/CD-ES66 DISPLAY PWB-A2 SW704 SW702 SW703 CLOCK/TIMER TUNING UP TUNING DOWN SW701 POWER ON/STAND-BY FFC701 SW707 FAST FORWARD/ PRESET UP SW705 FAST REWIND/ PRESET DOWN COLOR TABLE R738 BROWN R730 SW706 R746 RD(R ) R750 EQUALIZER SW712 R740 ORANGE TUNER...
  • Page 65 CD-ES600/CD-ES66 P6-11 12-G FROM MAIN PWB POWER PWB-B1 CNS801 R841 1 2 3 4 5 6 CNP802 D853 R844 CNP801 R858 C810 C841 C811 D801 C804 D802 C843 R842 C808 Q841 B C E F802 R843 4A/125V PT801 MAIN POWER TRANSFORMER T.F.
  • Page 66 CD-ES600/CD-ES66 CD SERVO PWB-C C51 C52 20 21 FFC1 FFC704 25 20 10 15 CNP4 6 5 4 3 2 1 FFC4 COLOR TABLE BROWN R D ( R ) ORANGE YELLOW GREEN BLUE VIOLET CNS3A GRAY W H ( W )
  • Page 67 CD-ES600/CD-ES66 P6-12 6-E TAPE MECHANISM TO DISPLAY PWB ASSEMBLY CNP702A TAPE MECHANISM PWB-D FFC702 SOLENOID SOLENOID TAPE MOTOR TAPE 2 TAPE 1 RECORD/PLAYBACK PLAYBACK HEAD ERASE HEAD HEAD CLAMP TRAY SW1 CNP102 CNP101 P6-11 11-D TO MAIN PWB P6-11 11-C...

  • Page 68: Chapter 7. Flowchart

    CD-ES600/CD-ES66 CD-ES600/CD-ES66 Service Manual CD-ES600/CD-ES66 Market CHAPTER 7. FLOWCHART [1] Troubleshooting 1. When the CD does not function The CD section may not operate when the objective lens of the optical pickup is dirty. Clean the objective lens, and check the playback operation.
  • Page 69 CD-ES600/CD-ES66 (1) Focus-HF system check. Stopped CH1=500 mV CH3=500 mV 500 ms/div DC 10:1 DC 10:1 (500 ms/div) NORM:20 kS/s Although a CD is inserted and the cover is closed, "NO DISC" is displayed. Press the Tray1 CD Eject Button without inserting a disc, and try starting the playback operation.
  • Page 70 CD-ES600/CD-ES66 (2) Focus-HF system check. Check the TE waveform at pin 17 on IC1. If the waveform shown in Figure 4 appears and soon after NO The tracking servo is not activated. DISC appears? Check the peripheral circuits at pins 16, 17 and 22 on IC1, and FFC1.
  • Page 71 CD-ES600/CD-ES66 (4) PLL system check. Stopped 1999/04/05 17:33:17 CH1=500 mV CH3=1 V CH4=1 V 500 ms/div DC 10:1 DC 10:1 DC 10:1 (500 ms/div) NORM:20 kS/s When a disc is loaded, start play operation. PDO1 The HF waveform is normal, but the TOC data cannot be read.

  • Page 72: Function Table Of Ic

    CD-ES600/CD-ES66 CD-ES600/CD-ES66 Service Manual CD-ES600/CD-ES66 Market CHAPTER 8. OTHERS [1] Function table of IC IC1 VHiLC78648E-1: CD Servo (LC78648E) (1/2) Pin No. Terminal Name Input/Output Setting in Reset Function AVDD1 Output — Analog power supply pin 1. SLCO Output —...
  • Page 73 CD-ES600/CD-ES66 IC1 VHiLC78648E-1: CD Servo (LC78648E) (2/2) Pin No. Terminal Name Input/Output Setting in Reset Function RCHO Output RVDD /2 Right channel R channel Power supply pin. D/A converter RVDD — — R channel output supply pin. XVSS — —...
  • Page 74 CD-ES600/CD-ES66 IC1 VHiLC78648E-1: CD Servo (LC78648E) 75 74 72 71 69 68 66 65 63 62 AVDD1 DVDD SLCO DATA EFMIN DATACK LRSY ASDFIN JITTC ASDACK ASLRCK F16MOUT OUT1 F16MIN LC78648E IOMODE PHLPF/RFMON XVDD VREF XOUT XVSS RVDD RCHO TEIN...
  • Page 75 CD-ES600/CD-ES66 IC2 VHILA6261//-1: Focus/Tracking/Spin/Sled Driver (LA6261) Pin No. Terminal Name Function VO3+ BTL Output pin (+) for channel 3. VO3- BTL Output pin (-) for channel 3. VO2+ BTL Output pin (+) for channel 2. VO2- BTL Output pin (-) for channel 2.
  • Page 76 CD-ES600/CD-ES66 IC2 VHILA6261//-1: Focus/Tracking/Spin/Sled Driver (LA6261) VOLTAGE CONTROL AMP DUFFER AMP DUFFER AMP For VREF For 1/2 VCC Refcronce voltage Bandgad Figure 8-5 BLOCK DIAGRAM OF IC 8 – 5...
  • Page 77 CD-ES600/CD-ES66 IC601 VHiLC75341/-1: Audio Processor (LC75341) Pin No. Terminal Name Function Pin No. Terminal Name Function 13-16 R1-4 Input signal pin. Serial data and clock input pin for con- RSEL0 Input selector output pin. trol. Volume + equaliser output pin Chip enable pin.
  • Page 78 CD-ES600/CD-ES66 IC701 RH-iXA002AWZZ: System Microcomputer (IXA002AW)(Serial NO.310000001~402XXXXX) (1/2) IC701 RH-iXA007AWZZ: System Microcomputer (IXA007AW) (Serial NO.402XXXXX)(1/2) IC701 RH-iXA020AWZZ: System Microcomputer (IXA020AW)(Serial NO.402XXXXX ~) (1/2) Pin No. Port Name Terminal Name Input/Output Function Input (+) Power supply 5 V. -20dBATT Output -20dB Attenuator.
  • Page 79 CD-ES600/CD-ES66 IC701 RH-iXA002AWZZ: System Microcomputer (IXA002AW)(Serial NO.310000001~402XXXXX) (2/2) IC701 RH-iXA007AWZZ: System Microcomputer (IXA007AW) (Serial NO.402XXXXX)(2/2) IC701 RH-iXA020AWZZ: System Microcomputer (IXA020AW)(Serial NO.402XXXXX~) (2/2) Pin No. Port Name Terminal Name Input/Output Function P120 TRAY SW1 Input 5-Changer Tray SW1. P117 DISC SW Input 5-Changer Disc SW1.
  • Page 80 CD-ES600/CD-ES66 IC701 RH-iXA002AWZZ: System Microcomputer (IXA002AW)(Serial NO.310000001~402XXXXX) IC701 RH-iXA007AWZZ: System Microcomputer (IXA007AW) (Serial NO.402XXXXX) IC701 RH-iXA020AWZZ: System Microcomputer (IXA020AW)(Serial NO.402XXXXX~) P87/FIP20 -20dBATT VLOAD VLOAD T_BIAS P36/BUZ P90/FIP21 T_REC/PLAY P35/PCL P91/FIP22 P34/T12 P92/FIP23 CD_RESOUT P33/T11 P93/FIP24 CD_WRQ P32/TO2 P94/FIP25 IXA002AW(Serial No.31000001~402XXXXX)
  • Page 81 CD-ES600/CD-ES66 IC851 VHIAN80T53/-1: Multi Regulator (AN80T53) Terminal Name Function REG4 Output 5.1 V power supply with a minimum peak out current of 1200 mA. REG3 Output 13 V power supply with a minimum peak out current of 1350 mA. Connected to Power supplies.

  • Page 82: Fl Display

    CD-ES600/CD-ES66 [2] FL Display FL701 VVKNA11SS55-1 GRID ASSIGNMENT CD MP3 X-BASS MEMORY ANGLE CHAP TITLE WMAV- SURROUND DAILY h j k (1G) (2G~9G) ANODE CONNECTION PTYI D5-a D5-b X-BASS D5-c D4-a D4-b SURROUND D4-c DAILY TITLE CHAP D3-a ANGLE D3-b...

  • Page 83: Parts Guide

    CD-ES600/CD-ES66 PARTS GUIDE MINI COMPONENT SYSTEM CD-ES600 MODEL CD-ES600 Mini Component System consisting of CD-ES600 (main unit) and CP-ES600 (speaker system). MINI COMPONENT SYSTEM CD-ES66 MODEL CD-ES66 Mini Component System consisting of CD-ES66 (main unit) and CP-ES66 (speaker system). “HOW TO ORDER REPLACEMENT PARTS”...
  • Page 84 CD-ES600/CD-ES66 PRICE PRICE PART CODE DESCRIPTION PARTS CODE DESCRIPTION RANK RANK ZD801 VHEDZ6R2BSA-1 AB Zener,6.2V,DZ6.2BSA CD-ES600/CD-ES66 ZD802 VHEDZ7R5BSB-1 AB Zener,7.5V,DZ7.5BSB ZD803 VHEDZ300BSB-1 AB Zener,30V,DZ30BSB INTEGRATED CIRCUITS ZD805 VHEDZ120BSB-1 AB Zener,12V,DZ12BSB ZD902,903 VHEDZ120BSB-1 AB Zener,12V,DZ12BSB VHILC78648E-1 AW CD Servo,LC78648E FILTERS VHILA6261//-1...
  • Page 85 CD-ES600/CD-ES66 PRICE PRICE DESCRIPTION DESCRIPTION PART CODE PARTS CODE RANK RANK AA 0.001 µF,50V AA 0.01 µF,50V VCKYCY1HB102K J C385 VCKYCY1HB103K J AA 0.01 µF,16V VCKYCY1CB103K J C386 VCKYCY1HB331K J AA 330 pF,50V AB 100 µF,10V,Electrolytic AB 0.022 µF,25V VCEAZA1AW107M J...
  • Page 86 CD-ES600/CD-ES66 PRICE PRICE PART CODE DESCRIPTION PARTS CODE DESCRIPTION RANK RANK RESISTORS R353 VRS-CY1JB271J AA 270 ohms,1/16W R355 VRS-CY1JB332J AA 3.3 kohms,1/16W R356 VRS-CY1JB102J AA 1 kohm,1/16W VRS-CY1JB000J AA 0 ohm,Jumper,0.8×1.55mm,Green R357 VRS-CY1JB474J AA 470 kohms,1/16W VRD-ST2CD563J AA 56 kohms,1/6W...
  • Page 87 CD-ES600/CD-ES66 PRICE PRICE DESCRIPTION DESCRIPTION PART CODE PARTS CODE RANK RANK R785 VRS-CY1JB272J AA 2.7 kohms,1/16W RD32 VRS-CY1JB153J AA 15 kohms,1/16W R786 VRS-CY1JB472J AA 4.7 kohms,1/16W R787 VRD-ST2CD472J AA 4.7 kohms,1/6W OTHER CIRCUITRY PARTS R788,789 VRD-ST2CD103J AA 10 kohm,1/6W R790 VRS-CY1JB822J AA 8.2 kohms,1/16W...
  • Page 88 (Not Replacement Item) 306- 2 NGERR0043AFZZ AC Gear,Rack CCABA5569AW01 J Front Panel Ass’y [CD-ES66] 306- 3 MSPRC0961AFZZ AA Spring,Rack CCABA5570AW01 J Front Panel Ass’y [CD-ES600] PCUSG0001AWSA J AD Cushion PCUSG0004AWSA J AD Cushion 201- 1 ———— –– Front Panel XBSSD26P06000 AA Screw,ø2.6×6mm...
  • Page 89 CD-ES600/CD-ES66 PRICE PRICE DESCRIPTION DESCRIPTION PART CODE PARTS CODE RANK RANK 209-8 92PFF20B-13 Belt,Main [ Tape 1] CPNLSA002AW01 J AZ Front Panel Ass’y,Right [CP-ES600] 209-9 92PF552-061 AZ Clutc Ass'y Block [ Tape 1] 209-10 92PFF19S-52 Belt,FF/REW [ Tape 2] CPNLSA002AW02 J AZ Front Panel Ass’y,Right...
  • Page 90 CD-ES600/CD-ES66 CD-ES600/CD-ES66 306-2 306-1 306-3 703x2 305x2 NSW1 PWB-F Figure 7 CD MECHANISM EXPLODED VIEW – 7 –...
  • Page 91 CD-ES600/CD-ES66 CD-ES600/CD-ES66 BELT CONNECTION FF/REW Tape FF/REW CHANGER ROLLER Motor ROLLER 601x5 MECHANISM UNIT ASS'Y ASS'Y FLYWHEEL FLYWHEEL ASS'Y ASS'Y MAIN BELT TAPE2 TAPE1 PWB-D 601x3 209-3 605x6 209-7 209-2 MECHANISM 209-8 603x4 209-4 209-9 209-11 601x3 601x2 209-1 209-5...
  • Page 92 CD-ES600/CD-ES66 CD-ES600/CD-ES66 803x6 801x2 PWB-E 109-3 109-5 803x2 109-1 109-4 109-2 Figure 9 CHANGER MECHANISM EXPLODED VIEW – 9 –...
  • Page 93 CD-ES600/CD-ES66 CP-ES600/CP-ES66 SP3, SP3, TWEETER TWEETER Capacitor Capacitor 1.5 µF, 1.5µF, 100V(N.P.) 100 V(N.P.) SP1, WOOFER SP1, 914x3 WOOFER 903,904 912x4 905,906 SP3, 901,902 911x2 913x4 SP1,2 910x4 SP5,6 915x4 Figure 10 SPEAKER VIEW – 10 –...
  • Page 94 Quick Guide [Tape1] Accessories Label, Feature Remote Control [Tape2] FM Antenna SPAKZA009AWZZ Spacer R I G S I D S I D SPAKCA019AWZZ (CD-ES600) SPAKCA032AWZZ (CD-ES66) TLABZA049AWZZ (CD-ES600) Packing Case TLABZA050AWZZ (CD-ES66) Serial No Label Not Replacement Item – 11 –...
  • Page 95 CD-ES600/CD-ES66 –– MEMO –– – 12 –...
  • Page 96 CD-ES600/CD-ES66 © COPYRIGHT 2004 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any from or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Cd-es66

Table of Contents