Table of Contents
Advertisement
Programmed Play
Up to 32 CD tracks or 20 MD tracks can be programmed.
You cannot programme CD and MiniDisc tracks together at the same time.
1
(CD operation)
Whilst in the stop mode, press the CD button.
(MiniDisc operation)
Whilst in the stop mode, press the MD button.
2
Press the MEMORY button to enter the programming save mode.
CD operation: Go to step 3.
MD operation: Go to step 4.
3
Press one of the
1 -
4
Use the 5
5 or 4
4 button on the remote control or the jog dial on
5
5
4
4
5
4
the main unit to select the desired track.
22
Web-site: www.sharp.co.uk/support
6 buttons to select the desired disc.
Selected disc number
Selected track number
Playback order
Help Line: 08705 274277 (office hours)
5
Press the MEMORY button on the remote control or ENTER but-
ton on the main unit to save the track number.
6
Repeat steps 4 - 5 for other tracks. Up to 32 tracks on CDs or 20
tracks on MiniDisc can be programmed.
7
Press the
button.
8
Press the 06/D
06/D button to start playback.
06/D
06/D
06/D
At this time, playback will not begin even if one of the DISC 1 - DISC 6
buttons is pressed of the CDs. (When CD programmed play.)
To clear the programmed selections:
Press the CLEAR button whilst the "MEMORY" indicator is flashing.
Each time the button is pressed, one track will be cleared,
beginning with the last track programmed.
To cancel the programmed play mode:
Whilst in the stop mode, press the CLEAR button. The "MEMORY"
indicator will disappear and all the programmed content will be
cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be displayed.
Then follow steps 2 - 7 to add additional tracks. The new tracks will be stored after the
last track of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the 5 or 4 button.
Notes:
Opening any tray of the programmed discs or ejecting a MiniDisc automatically
cancels the programmed sequence.
Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD or MD to another function, the programmed selections will not
be cleared.
During programme operation, random play is not possible.
Playback time
Advertisement
Table of Contents
