Sharp CD-E600H Operation Manual page 37

! Remote control
Symptom
" The remote control does " Is the AC power lead of the unit
not operate. plugged in?
" Is the battery polarity correct?
" Are the batteries dead?
" Is the distance or angle incor-
rect?
" Does the remote control sensor
receive strong light?
! If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
! Clearing all the memory (reset)
1 Press the ON/STAND-BY button to enter the power stand-by
Possible cause
mode.
2 Whilst pressing down the
button, press the ON/STAND-BY button until "CLEAR AL"
appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
! Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
! Before transporting the unit
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the OPEN/CLOSE
Remove all CDs inserted in the unit.
4 Press the OPEN/CLOSE
Make sure that "NO DISC" is displayed.
5 Press the ON/STAND-BY button to enter the stand-by mode,
and then unplug the AC power lead from the wall socket.
02/12/24
/ button and the X-BASS/DEMO
button to open the disc tray.
button to close the disc tray.
CD-E600H(H)E3.fm
CD-E600H
ENGLISH
8
E-30