Programmed Play - Sharp CP-XP120H Operation Manual

Listening to a CD (CDs) (continued)
CD-XP120H
ENGLISH

" Programmed play

This may be operated only with the remote control.
You can choose up to 20 selections for playback in the order you
like.
1 Whilst in the stop mode, press
one of the 1 - 3 buttons to
select the desired disc.
2 Press the / or /
button to select the desired
track.
If you select and memorise a track whose number exceeds the
last track number on the disc, it will not be played back.
3 Press the MEMORY/SET button to save the track number.
When the track is memorised, "MEMORY" will appear.
4 Repeat steps 1 - 3 for other tracks. Up to 20 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
5 Press the / button to start playback.
E-15
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the
CD to the stop mode and then press the
CLEAR button.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
Selected disc number
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
! If you open the disc tray, change to another function or enter the
Selected track number
stand-by mode, the programmed sequence is automatically can-
celled.
! During programme operation, random play is not possible.
" Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
! Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
Playback order ! Keep your discs away from direct sunlight, heat, and excessive
moisture.
! Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
02/4/15
NO YES
Correct
CD-XP120H(H)E2.fm