Troubleshooting Chart - Sharp CD-E600H Operation Manual

Troubleshooting chart

CD-E600H
ENGLISH
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
! General
Symptom
" The clock is not set to the
correct time.
" When a button is pressed,
the unit does not respond.
" No sound is heard.
! CD player
Symptom
" Playback does not start.
" Playback stops in the mid-
dle or is not performed
properly.
" Playback sounds are
skipped, or stopped in the
middle of a track.
E-29
Possible cause
" Did a power failure occur? Reset
the clock. (Refer to page 10.)
" Set this unit to the power stand-
by mode and then turn it back on.
" If the unit still malfunctions, reset
it. (Refer to page 30.)
" Is the volume level set to "0"?
" Are the headphones connected?
" Are the speaker wires discon-
nected?
Possible cause
" Is the disc loaded upside down?
" Does the disc satisfy the stan-
dards?
" Is the disc distorted or
scratched?
" Is the unit located near excessive
vibrations?
" Is the disc very dirty?
" Has condensation formed inside
the unit?
! Tuner
Symptom
" The radio makes unusual " Is the unit placed near the TV or
noises continuously. computer?
" Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
! Cassette deck
Symptom
" Cannot record. " Is the erase-prevention tab re-
moved?
" Cannot record tracks with " Is it a normal tape? (You cannot
proper sound quality. record on a metal or CrO tape.)
" Cannot erase completely.
" Sound skipping. " Is there any slack?
" Is the tape stretched?
" Cannot hear treble. " Are the capstans, pinch rollers,
or heads dirty?
" Sound fluctuation.
" Cannot remove the tape. " If a power failure occurs during
playback, the heads remain en-
gaged with the tape. Do not open
the compartment with great
force.
02/12/24 CD-E600H(H)E3.fm
Possible cause
Possible cause