•
Activating/deactivating
advisory tones
Your handset uses advisory tones to tell you
about different activities and statuses. The
following advisory tones can be activated/
deactivated independently of each other:
u
Key tone: every key press is confirmed.
u
Acknowledge tones:
– Confirmation tone (ascending tone
sequence): at the end of an entry/set-
ting and when a new entry arrives in
the answering machine list or call list
– Error tone (descending tone
sequence): when you make an incor-
rect entry
– Menu end tone: when scrolling to the
end of a menu
u
Battery low beep: the battery needs
charging.
In idle status:
Ï
¢
¢
v
Audio Settings
¢
Advisory Tones
¤
You can enter data in the following fields:
Key Tones:
Select On or Off.
Confirmation:
Select On or Off.
Battery:
Select On or Off.
§Save§
Press the display key.
•
Setting long-distance and
area codes
To transfer phone numbers via USB phone
from your outlook (e.g., in vCards), it is essen-
tial that your area code (international and
local area code) is saved on the phone.
Some of these numbers are already preset.
Ï
¢
¢
v
Telephony
Check that the preset area code is correct.
¤
You can enter data in the following fields:
q
Select/change input field.
¢
Area Codes
r
Navigate to the input field.
Ñ
If necessary, delete number:
press the display key.
~
Enter number.
§Save§
Press the display key.
Example:
Area Codes
International code:
011- 1
Local access code:
1-972
Û
Save
Note:
If a long distance number is recorded in a
vCard without the national access code "1" (
i. e., 312 -555-1212 instead of 1-312-555-
1212), please add the "1" in front of the tele-
phone number before transferring the
number to the S79H handset via USB.
•
Restoring the handset
default settings
You can reset individual settings and
changes that you have made.
When you perform a reset, the settings listed
below are automatically retained.
u
Registration to the base
u
Date and time
u
Entries in the calendar
u
Entries in the directory, the call lists and
the content of the resource directory
Ï
¢
¢
v
System
§Yes§
Press the display key.
Handset settings
¢
Handset Reset
57