Restoring The Handset Default Settings; Base Station Settings; Restoring The Base Station To Factory Settings - Siemens Gigaset C 450 Manual

Gigaset C 450 / en-AUS / A31008-M1706-C401-1-7619 / settings_bs_hs_pabx.fm / 8.8.06

Base station settings

Setting the wake up time.
¢
Alarm Clock
§Menu§
~
Enter the wake up time in hours
and minutes, then press
When the alarm clock rings...
Alarm repeat after 5 minutes
Press the display key or any key.
§Snooze§
If you press
§Snooze§
switches off for 24 hours.
Switching off the alarm clock for 24 hours
Press the display key.
§Off§
Restoring the handset default
settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, calls list, or SMS
lists or the handset's registration to the base
station.
¢ ¢
Settings
§Menu§
Press the display key to confirm.
§OK§
a
Press and hold (idle status).
Cancel the reset with
Base station settings
The base station settings are carried out using a
registered Gigaset C45 handset.
Changing the system PIN
You have to enter the system PIN when register-
ing a handset to the base station.
You can change the base's 4-digit default sys-
tem PIN ("0000") to a 4-digit PIN known only to
yourself.
¢ ¢
Settings
§Menu§
~
Enter your new system PIN and
press
shown as four stars ( **** ).
a
Press and hold (idle status).
24
¢
Wakeup time
.
§OK§
three times the alarm clock
¢
Handset Reset Handset
a
.
¢
Base System PIN
. For security the PIN is
§OK§
Restoring the base station to
factory settings
When the settings are restored all handsets are
de-registered. Each individual setting is
restored. Only the date and time are retained.
Resetting the base station using the menu
¢ ¢
Settings Base
§Menu§
Press the display key to confirm.
§OK§
Resetting the base station using a key on
the base station
¤
Remove the base station mains adapter
(page 4) from the power socket.
÷
Press the registration/paging key
(page 1) and hold down.
¤
Replug the mains unit into your power
socket.
÷
Continue to press the registration/
paging key (page 1).
¤
Release the registration/paging key
(page 1). The base station has now been
reset.
¢
Base Reset