Using The Stop/Clear Key; Setting The Clock - Sharp R-90GCK Operation Manual

UK R90GCK English Cover-P19 04.1.9 8:55 AM Page 8

USING THE STOP/CLEAR KEY

Your oven has a 12 hour clock.
• To set the 12 hour clock, press the CLOCK SET
key once.
Example:
To set the time of day follow the instructions below:
1. Select the clock.
x1
4. Enter the minutes by
pressing the TIME keys.
NOTES:
• Press the STOP/CLEAR key if you make a mistake during programming.
• If you press any of the TIME keys too many times, continue to press the key until the desired time re-
appears.
• To check the time of day during a cooking process, press the CLOCK SET key and the time of day will
remain on the display as long as you keep your finger on the key. This does not affect the cooking
process.
• When cooking is complete, the display will show "END".
• If the electrical power supply to your microwave oven is interrupted, the display will show "PRESS
STOP" after the power is reinstated. If this occurs during cooking, the programme will be erased. The
time of day will also be erased.
• When you want to reset the time of day, follow the above example again.
Use the STOP/CLEAR key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press the STOP/CLEAR key
twice.

SETTING THE CLOCK

2. Enter the hours by pressing
the TIME keys.
5. To start the clock, press
the CLOCK SET key
once.
8
A39887,R90GCK O/M
x1
3. Press the CLOCK SET
key once.
x1
TINSEA962WRRZ-K32 UK R90GCK
x1