Installation - Sharp R-61FBSTM Operation Manual With Cookbook

R-61+62FBSTM Operation Manual
INSTALLING THE APPLIANCE
1. Remove all packaging and check carefully for
any signs of damage.
2. Fit the appliance into the kitchen cupboard
slowly, and without force, until the front
frame of the oven seals against the front
opening of the cupboard.
3. Ensure the appliance
is stable and not
leaning. Ensure that a
5mm gap is kept
between the
cupboard door above
and the top of the
frame (see diagram).
SAFE USE OF THE APPLIANCE
• This appliance has been tested and approved for use near domestic gas, electric and induction
hobs only.
• Sufficient space between hob and microwave should be allowed to prevent overheating of
microwave oven, surrounding cupboard and accessories.
• Do not operate the hob without pans
when the microwave oven is operating.
• The cupboard must be a minimum of
500 mm (A) above the worktop and
must not be installed directly above a
hob or other kitchen appliance e.g.
conventional oven or refrigerator.
• Care should be taken when attending
to the microwave oven while the hob
is on.
• The front of the oven can be cleaned
with mild soap and water.
Do not use commercial oven cleaners,
abrasive harsh cleaners, or those that
contain Sodium Hydroxide.
24/07/2003 10:27

INSTALLATION

4. Fix the oven in position with
the screws provided.
The fixing points are located
on the top and bottom
corners of the oven (see
diagram, item 11, on page 2).
5. It is important to ensure that the installation
of this product conforms to the instructions in
this operation manual and the hob
5 mm
manufacturer's installation instructions.
If you require assistance concerning the
installation of the appliance, please contact
your nearest authorized Sharp service agent,
see page 27 for details.
5
Page 5
A
A