Installation - Sharp R-27C-B Operation Manual

1. Remove all packing materials from the inside of
the oven cavity and remove any protective lm
found on the microwave oven cabinet surface.
Check the oven carefully for any signs of damage.
2. Place the oven on a secure, level surface, strong
enough to take the oven weight, plus the heaviest
item likely to be cooked in the oven. Do not place
the oven in a cabinet.
3. Select a level surface that provides enough open
space for the intake and/or outlet vents. The rear
surface of appliance shall be placed against a wall.
• A minimum space of 20cm is required between
the oven and any adjacent walls.
• Leave a minimum space of 30cm above the
oven.
• Do not remove the feet from the bottom of the
oven.
• Blocking the intake and/or outlet openings can
damage the oven.
• Place the oven as far away from radios and TV as
possible. Operation of the microwave oven may
cause interference to your radio or TV reception.
30 cm
0 cm
20 cm
20 cm
min
85 cm
4. The oven door may become hot during
cooking. Place or mount the oven so that the
bottom of the oven is 85cm or more above
the oor. Keep children away from the door to
prevent them burning themselves.
5. Securely connect the plug of the oven to a
standard earthed (grounded) household electrical
outlet.
WARNING: Do not place the oven where heat,
moisture or high humidity are generated, (for
example, near or above a conventional oven) or near
combustible materials (for example, curtains).
Do not block or obstruct air vent openings.
Do not place objects on top of the oven.
ELECTRICAL CONNECTION
• Do not allow water to come into contact with the
power supply cord or plug.
• Insert the plug properly into the socket.
• Do not connect other appliances to the same
socket using an adaptor plug.
• If the power supply cord is damaged, it must be
replaced by a Sharp approved service facility or a
ed person to avoid a hazard.
• When removing the plug from the socket always
grip the plug, never the cord as this may damage
the power supply cord and the connections inside
the plug.
GB-7

INSTALLATION