Queuing Calls - Snom 360 User Manual

3.5 Queuing Calls

Logging in and out of a call queue
Objectworld Unified Communications Server
• Press 5 to unmute all other participants. Response: "All others have been
unmuted."
• Press 7 to toggle between closing and opening the conference to additional
participants. Response: "The conference is now closed to additional
participants." Response: "The conference is now reopened to additional
participants."
• Press 9 to end the conference.
• Press 0 to report the number of participants. Response: "Including yourself, there
are x participants."
• Press # to return to the conference.
Call queuing allows callers to remain in a queue while they wait for their call to be
answered. If callers know the queue number, they can dial directly into the queue.
The company agent is typically associated with a particular area of expertise, for
example, sales or support. A support agent who is ready to answer calls can log into
the support agent queue and receive support calls in order of arrival. Call queuing
allows calls to be distributed evenly among the agents that are logged into the queue.
For more information on queuing calls see the following sections:
• Logging in and out of a call queue
• Temporarily stop accepting queued calls
• Checking your agent status in a call queue
NOTE: The call queuing codes, in particular, the code to Log out of a
call queue (*82) conflicts with one of the Grandstream feature codes,
Send Caller ID. Therefore your system administrator may have
changed the call queuing codes from their default values listed below.
For more information see your system administrator.
To log in to a queue as an agent
1 Dial *81<QueueNumber>.
2 Hang up.
To log out of a queue as an agent
1 Dial *82<QueueNumber>.
As previously noted, your system administrator may have changed the code
number from the default value of *82. For more information see your system
administrator.
Queuing Calls
19