Ending Calls; Redialing; Forwarding Calls - Snom 360 User Manual

Move cursor left/right

2.9 Ending Calls

2.10 Redialing

Redial key

2.11 Forwarding Calls

Call forwarding
menu
Objectworld Unified Communications Server
4 Connect the two parties by pressing the transfer key.
NOTE: This behavior is available only if the option "Call join on Xfer"
on the "advanced" web page is enabled. If this option is disabled,
select the party you want to transfer the call to by pressing the arrow
keys to move the cursor left or right, followed by pressing the call
transfer keys.
End calls by putting the handset on the cradle, pressing the hook switch, or pressing
the x key. The snom 360 ends the call and returns to the idle state.
You can dial the last call placed from your phone by pressing the redial key.
You can forward calls to another extension. Press the Call Forwarding button to
access the Call Forwarding menu.
The currently active setting is preceded by an asterisk "*."
To forward all calls
1 Press the Call Forwarding button to access the Call Forwarding menu.
2 From the Call Forwarding menu, select Always.
Every incoming call is immediately forwarded to the number set in the
following window "Redirect target," without the phone ringing.
To cancel call forwarding
1 Press the Call Forwarding button to access the Call Forwarding menu.
2 From the Call Forwarding menu, select Off.
Ending Calls
9