Snom 360 User Manual page 19

UC Server Call Features
Using the UC Server Conference Bridge
Conference Server
Note: The bridge number must be 4 digits
long.
Conference Server - Prompt Caller
This feature is used for external callers to
connect to a conference bridge.
Parking Calls and Picking up Parked Calls
Park a call using a specific park number
Allows you to park a call so that you can
pickup the call using a different phone. This
feature is useful if you need to switch phones
while on a call.
Park a call at a park number selected by UC
Server
This feature is the same as above, except
that the call is parked at a number chosen by
UC Server instead of you choosing the
number to park the call.
This is useful if you are uncertain whether
another call has already been parked at a
particular number.
Pickup a parked call
Enables a user to pick up a parked call
Paging
Sending a Live Page
You can send a live page.
Objectworld Unified Communications Server
Using the UC Server Call Feature Access Codes
Key Codes Examples and Notes
7050 + bridge# To automatically connect to the conference
server bridge number 1234, dial:
70501234
7050 To connect to the conference server, dial:
7050
You will then be prompted to enter a bridge
number.
*99 + park# To park a currently connected call at park
number 1234:
1. Put the current call on hold.
2. Establish a new call.
3. Dial *991234
The call is automatically parked at 1234.
*99 To park a currently connected call:
1. Put the current call on hold.
2. Establish a new call.
3. Dial *99.
The system will tell you what number the call
is parked at.
*98 + park# To pickup a call parked at 1234, dial:
*981234
Contact your system administrator for
instructions on sending recorded pages.
*72 To send a live page
1. Dial *72 (or *PA)
2. After you hear the tone, begin speaking.
3. When you are finished with the page, hang
up or use the end call function on your
phone.
15