Installing The Appliance; Wall Fixing - Smeg Hob Instructions For The User

Hide thumbs Also See for Hob:

Table of Contents

4. INSTALLING THE APPLIANCE

The appliance must be installed by a qualified technician and according to the regulations in force.

Depending on the type of installation, it belongs to class 1 (Fig.A) or to class 2, subclass 1 (Fig.B-C).

This appliance may be installed next to walls, one of which must be higher than the appliance, at a

minimum distance of 50 mm from the side of the appliance, as shown in drawings A and B relative to the

installation classes. Any wall cupboards or ventilation hoods must be at a distance of at least 750 mm

above the work surface.

Appliances equipped with a gas cylinder compartment and electric oven can only be installed as free-

standing (see fig. B).

In order to avoid the cooker tipping over it must be attached

to the wall by means of a chain, as described below:

• Stretch out horizontally the chain attached to the cooker

• so that the other end touches the wall.

• Draw a mark on the wall in the position where the hole is

to be drilled.

• Drill the hole, insert a wall plug and attach the chain.

• Move the cooker up against the wall.

Instructions for the installer

Built-in appliance

Free-standing installation

Table of Contents