Cleaning The Oven; Cleaning The Door Glazing - Smeg Hob Instructions For The User

Hide thumbs Also See for Hob:

Table of Contents

Instructions for the user

11.2.2 Burner caps and flame-spreader crowns

For easier cleaning, the caps and the flame-spreader crowns can be removed;

wash them with warm water and a non-abrasive detergent, making sure to

remove any encrustation, and wait until they are perfectly dry.

WARNING: never wash these parts in a dishwasher.

They can be left to soak in warm water and detergent.

Replace the flame-spreader crowns, making sure that they are correctly in place

with their respective burner caps, and ensuring that the holes A in the flame-

spreaders are aligned with the igniters and thermocouples.

11.2.3 Igniters and thermocouples

For correct operation, on those models that have them, the igniters and thermocouples

must always be perfectly clean. Check them frequently and clean them with a damp cloth

if necessary. Remove any dry residues with a wooden toothpick or a needle.

11.3 Cleaning the oven

For the best oven upkeep, clean it regularly after having allowed it to cool.

Take out all removable parts.

Clean the oven racks with hot water and non-abrasive detergent. Rinse and dry.

The glass in the door should always be kept thoroughly clean. Use absorbent kitchen roll; remove

stubborn dirt with a damp sponge and an ordinary detergent.

Table of Contents