Problems And Causes - Smeg Oven Instructions For The User

Instructions for the user

12. PROBLEMS AND CAUSES

Each of the following cases is caused by an abnormal operation of the
appliance and should be dealt with by a authorised person: please
contact your local dealer or Service Center in case you detect any of
these malfunctioning.
PROBLEM
The flame is very long with
bright yellow tips.
Black deposits
bottom of the pans.
The flame is very short and
noisy. The flame moves
away from the burner ports.
The flame extinguishes
when the burner knob is set
to the low flame position.
The valve knob is hard to
rotate.
The cooker suddenly stops
working during operation of
the oven.
The electronic programmer
is not operating.
914772956/ C
42
Defect of comburent air
or incorrect injectors.
on the
Excess of comburent
air.
Incorrect adjustment of
the minimum heat input
or excess of comburent
air.
Gas valve worn out or
needs lubrification.
Overheating
appliance.
CAUSE
of the
WHAT TO DO
Call Service Center.
Call Service Center.
Call Service Center.
Call Service Center.
Let the appliance cool
down: the safety thermal
cut-out will self-reset
when the temperature
has decreased
correct value. Should the
problem arise again, call
the Service Center.
to a