Sitecom Wireless Router User Manual page 81

"The confirmed encryption key doesn't match"
The encryption key entered in the "Confirm Encryption Key" field is not the same as
the key in "Encryption key" field.
"Invalid DHCP static IP address"
An Invalid static DHCP IP address has been detected. This is not permitted. Please
select another address or modify the original entry.
"Conflict with dial-in address"
An IP address has been entered which is in conflict with the pool of IP addresses
reserved for dial in users. You must select another IP address, or modify the dial in
address range (from the IP browser screen, or from the Command Line Interface
using the "set user" command).
"Invalid private IP address"
The specified IP address is an invalid private IP address.
"Connection profile limit reached"
The maximum number of profiles that can be defined in the system is 20 Remote
Offices and Internet Access profiles or up to 48 Single User Dial-In profiles. To add
another of either type, you must delete an existing profile from the same type.
"Conversion integer/character failure."
An internal error occurred. Please report this to customer support.
"Current password is wrong. The correct password is required"
The password entered is incorrect. Please re-enter the password.
D
"Destination not currently reachable or call back configured"
Either the phone line is not operational, the destination is busy or doesn't answer , or
the remote profile is configured for call back and has disconnected the call.
"Detecting IPX network number..."
The system is attempting to automatically detect the IPX network number. This
occurs when a zero or a blank is entered as the IPX network number.
"DHCP static assignment table is full, no more actions allowed"
The maximum number of static DHCP entries has configured. You must delete a
static entry before a new one can be added.
"Disconnecting... Please wait. This action may take some
minutes."
This message is displayed whenever the link is in the process of disconnecting. This
6-3