Sitecom Wireless Router User Manual page 70

4-26
entries to the table. The following screen shows an example of the IPX SAP table.
SAP table entries contain the following pieces of information:
- Server Name: This is a string of up to 48 characters that identifies the
device providing the service
- Network Number: This is the identification of the network on which the
Server resides
- Node: The node address of the device providing the service. Note that this
node address may correspond to the device's physical MAC address, or it
may be an internal node number
- Socket: The two byte (four hexadecimal digit) address of the IPX socket
providing the service
- Type: The Service Type. Well-known service types include:
- IfName: The name of the interface through which this resource may be
accessed. This is either the LAN or a connection profile name
- Hops: The number of routers the packet must travel through in order to
reach its final destination. If this value is zero, the destination is in a network
directly attached to this router, i.e., the LAN.
- Flags: An "S" denotes a static IPX route
Hexadecimal
Service Type
Unknown
Print Queue
File Server
Job Server
Print Server
Archive Server
Remote Bridge Server
Advertising Print Server
Value
0000
0003
0004
0005
0007
0009
0024
0047