Sitecom Wireless Router User Manual page 51

default setting is Both.
Remote IP Address: Key in your remote side IP address when you set
Call Direction to Both or Outgoing
Note:
If you set Call Direction to Incoming Only, the Remote IP Address
field does not display.
My Tunnel Name: the name that the remote system will use to recognize
your network.
My Tunnel Password: the password the remote system will use to
authenticate your system.If the remote site does not require tunnel
authentication, leave this field blank.
Note:
Make sure the remote site is configured with your Tunnel Name (and
Tunnel Password, if used).
Remote Tunnel Name: the name of the remote network that is dialing in.
Remote Tunnel Password: the password that your Wireless Router will
expect to see from the remote system. If you do not require tunnel
authentication, leave this field blank.
Step 4
Click APPLY.
Set up a VPN Connection Profile
Step 1
Set up a VPN Connection Profile. Select Connection Profiles from the
Menu:
Configuration - Connection Profiles
Step 2
When you select Connection Profiles, the Connection Profile Summary
screen appears only if you have existing Connection Profiles.
Step 3 Select New from the pull-down menu, and click NEXT. The Interface
4-7