Sitecom Wireless Router User Manual page 57

using any IPX packet type.
2. "I want to disallow people in the manufacturing department to access the
Internet".
The corresponding "translated" packet rule is:
All access to the Internet is allowed EXCEPT
remote devices with the range of IP addresses in the manufacturing
department and any port number which are disallowed to communicate with
any IP address/port number over my Internet connection using any IP
protocol.
Configuring IP Packet Rules
To add a new IP packet rule or to edit an existing one, select IP Filter from the ARM
menu:
Configuration - Advanced - IP Filter
Step 1 From the IP Filtering Configuration screen, select the WAN profile of
interest from the pull down menu. For example, if your only need is to
control access to the Internet, you should only select the Internet access
profile.
Step 2
Select send or discarded as the default action as desired, which is
equivalent to allow and disallow, respectively.
Step 3 If you are just starting, click Add to add a new selection rule. If you have
previously defined rules, you will see those rules shown as entries in the
rule table, and you can edit the rule by first highlighting the desired entry
in the rule table followed by clicking the Edit button.
4-13