Table of Contents
Advertisement
Step 5
In the new Network Component Type window, select Protocol.
Step 6
In the new Select Network Protocol window, select Microsoft in the
Manufacturers area.
Select
Microsoft
Step 7
In the Network Protocols area of the same window, select TCP/IP, then
click OK. You may need your Win95/98 CD to complete the installation.
After TCP/IP installation is complete, go back to the Network window
shown in Step 4.
Step 8
Select TCP/IP in the list of Network Components.
Step 9
Click Properties, and check the settings in each of the TCP/IP Properties
window:
TCP/IP Properties Tabs
(IP Address Tab shown)
-Bindings Tab: both Client for Microsoft Networks and File and printer
sharing for Microsoft Networks should be selected.
-Gateway Tab: All fields should be blank
-DNS Configuration Tab: Disable DNS should be selected
-IP Address Tab: Obtain IP address automatically should be selected
Step 10 When the Wireless Router connected to the LAN (and powered on),
reboot the PC. After the PC is re-booted, you should be ready to configure
the Wireless Router. See Chapter 3.
Select
TCP/IP
2-3
Advertisement
Table of Contents
Need help?
Do you have a question about the Wireless Router and is the answer not in the manual?
Questions and answers