Table of Contents
Advertisement
TA/Analog Modem
Now select Internet Access as the Access Type (if your router is customized to
support Internet access only, this selection will be made by the system automatically).
Then press Enter, which will cause the following screen to show.
There are three ways to obtain an IP Address for your router, including via PPP over
Ethernet, via DHCP and No .If you choose "No", the following screen will appear
and please follow step 1. If you choose "via DHCP", please follow step 2, if you
choose "via PPP over Ethernet", please follow step 3
Step 1
Enter the following information:
Profile Name: the name that you will use to identify this Internet access
profile.
Obtain IP Addresses Automatically: Please specify IP address ,
netmask,gateway and domain name server assigned by ISP.
EWAN IP Address: the IP address of your EWAN.
EWAN IP Netmask: the IP Netmask of your EWAN.
ISP Gateway IP Address: the IP address of your ISP Gateway
Primary DNS IP Address: the IP address of primary domain name server
Secondary DNS IP Address: the IP address of secondary domain name
server
3-7
Advertisement
Table of Contents
Need help?
Do you have a question about the Wireless Router and is the answer not in the manual?
Questions and answers