Making Internal Calls - Gigaset S820H User Manual

Making calls

Making internal calls

Internal calls to other handsets registered to the same base are free of charge.
Menu key v ¤
‡ Internal Call
Handsets (group call).
After opening the list, press c to initiate a group call to all handsets.
Internal consultation/internal transfer
You are speaking with an external participant and want to consult an internal participant or
transfer the call to him.
¤ ¤
Consultation Internal
handset or All.
Consulting: you consult the internal participant and return to the external call:
Transferring the external call: you have two options to transfer the external call:
¤
You wait until the participant answers your call
Or:
¤ Press a before the participant answers.
If the other participant does not answer your call, press End to cancel the consultation call.
Call swapping/establishing a conference call
You are engaged in one conversation whilst another one is on hold. Both participants appear in
the display.
¤
Call swapping: on the display, touch the participant with whom you wish to speak.
Or:
¤
Establishing a three-way conference: touch Conference.
Ending the conference: touch End Conf.. You return to "call swapping" and are again con-
nected to the participant with whom you initiated the conference.
Each of the callers can end their participation in the conference call by pressing the end call key
and terminating the call.
Speaker
If you are going to let someone listen in, you should tell the other party that this is happening.
Activating handsfree mode while dialling
¤
Enter the number, press c twice.
Switching between earpiece and handsfree mode
During a call, when establishing a connection and when listening to the answer machine
(depending on the base):
¤
Press c.
Place the handset in the charger during a call:
¤ Press and hold the c key while placing the handset in the charger and hold for a further
2 seconds.
18
¤
if necessary, select a handset from the list or touch All
¤
If more than two handsets are registered to the base, select one
¤ press a.
¤
press End.