Table of Contents
Advertisement
Call waiting Telstra (Australia)
If this function is activated, a call waiting tone sounds dur-
ing an external call to indicate that a further party is call-
ing. The following message is displayed.
You have the following options:
¤
Reject
The waiting caller hears the busy tone.
Or:
¤
Accept
Once you have accepted the waiting call, you can
switch between the two callers or speak to both at the
same time.
For more information please contact Telstra.
Call waiting Optus (Australia)
You are on the phone and hear the beeps.
To put the first caller on hold and talk to the new caller (the caller on hold will hear nothing):
¤
Press the Recall key þ on your phone.
To return to the first caller:
¤
Press the Recall key þ and put the new caller on hold. You can alternate between the calls
in this way.
Or
¤
Hang up the first call. The phone will ring again with the second caller. This means that you
will not be able to go back to the first caller.
For more information please contact Optus.
Call waiting Telecom (New Zealand)
If you are in a call you will hear four call waiting tones.
Please consider, that no CLIP-information is available.
To accept the second call
¤
Press the recall key þ on your phone.
To return to the first caller
¤
Press the recall key þ again and you will be able to continue your first conversation.
For more information please contact Telecom NZ.
Call display
The default setting on your phone is set to display the caller's number. If the caller's number is
saved in your contacts, the number type and name will also be displayed. If you have assigned a
picture to the caller's number (
requested or withheld Calling Line Identification you will see External, Withheld or Unavailable
in the display.
Information on CLIP
¢
page 26), it also appears on the display. If the caller has not
¤
www.gigaset.com/service
Making calls
Incoming call from
Harry
Reject
Accept
17
Advertisement
Chapters
Table of Contents
