Accepting A Call - Gigaset S820H User Manual

Making calls

Accepting a call

You have the following options:
¤
Press c.
¤
If Auto Answer is activated (
Accepting/rejecting call waiting
If you receive a call during a conversation, you will hear a call waiting signal and see a corre-
sponding message on the display. For further information, please refer to your base user guide.
Call waiting Australia and New Zealand
Many Telecommunication providers in Australia and New Zealand offer a Call Waiting service on
your home phone line. Please speak to your service provider to check if your home phone line is
activated for this service (charges may apply).
Telstra (Australia):
The handset you have purchased has been preconfigured to work seamlessly with the Telstra
network.
When you receive a second call whilst you are on the phone you will hear a beep. You are able to
see what number is calling on the display (providing you have the caller ID function on your line).
There will be a button on the screen to either accept or reject the call.
Optus (Australia)
The handset you have purchased has the required information to work seamlessly with the
Optus network in Australia and the Telecom network in New Zealand. However there are some
settings that need to be changed before these settings are activated.
To activate the Call Waiting feature for use on these networks please perform the following
steps.
Changing the recall value:
¤
In the Settings menu, touch « Telephony.
¤
Touch ' next to Recall.
Different provider uses different recall values.
Recall value for Australia 80ms to 120ms (100ms in delivery state)
Recall value for New Zealand 300 ms to 800 ms (600 ms in delivery state).
Please consider that the recall value is set to 100ms after a base reset.
For other providers other recall values are possible
The most common providers instructions for Call Waiting are as follows.
Please note
These processes depend on the network provider and are subject to change.
16
¢
page 20), remove the handset from the charger.
and Telecom (New Zealand)
¤
Select recall (Ø = set value).
: