Charging The Battery; Registering The Handset - Gigaset S820H User Manual

Getting started

Charging the battery

The battery is supplied with a partial charge. The batteries are fully charged when the lightning
icon on the display goes out.
¤
Place the handset in the charger for 14.5 hours.
14.5 hr
Please note
u
The handset may only be placed in the designated Gigaset S820/S820A base or the
charger.
u
The battery may heat up during charging. This is not dangerous.
u
After a time, the charge capacity of the battery will decrease for technical reasons.

Registering the handset

When your handset has sufficient charge the registration
process starts. The registration screen is displayed.
Changing the display language:
¤
Menu key v
Menu page Settings
¤
° Language and Location
¤
Select language ( ´ = selected)
¤
Return to the registration screen: press the a key
briefly.
The registration process depends on the base:
u
Automatically registering a handset on the Gigaset S820/S820A base:
¤
Place the handset in the base.
If automatic registration does not work, the handset will have to be registered manually
u
Manually registering the handset:
¤
On the base: press and hold (at least 3 seconds) the registration/paging key.
¤
Press Register on the S820H handset
Or
Menu key v
Searching for a base which is in registration mode will appear on the display. This
creates a connection to the base, but it may take some time.
¤
If necessary, enter the system PIN (default: 0000)
Display during registration: Handset is registering
Display after successful registration: Handset registered
The installation wizard will start after successful registration. It helps you to perform important
basic settings.
Your handset can be registered on up to four bases. For how to use your handset on multiple
bases and de-register your handset, see your base user guide.
6
¤
Display Language
¤
è
¤
Menu page Settings
¤ ¤
É HS + Base Register
¤
Confirm PIN with è.
+
Handset not
registered to
any base
Register