Using handsets
Registering through a menu (on A170A/A270A only)
Registration must be initiated both on the base and on the handset. Both must be
carried out within 60 seconds.
On the handset
¤
MENU
Settings
PIN for the base (default setting: 0000)
On the base
¤
Within 60 seconds after entering the system PIN press and hold the Registration/paging key
(
p. 5) (at least 3 seconds).
The registration process takes approximately 1 minute. The handsets are assigned the
lowest free internal number (1-4). If the numbers 1-4 have already been allocated to
other devices, number 4 is overwritten.
De-registering the handset
You can de-register any other registered handset from any registered Gigaset handset.
¤
MENU
Settings
the internal participant to be de-registered.
The handset you are operating is marked with <
(default setting: 0000)
de-registered
Making internal calls
Making internal calls
Internal calls are cost-free calls to other handsets registered to the same base.
Calling a specific internal participant:
¤
INT
if more than two handsets are registered: use
use
to enter the internal number of a handset
¤
OK or
Calling all handsets ("group call"):
¤
INT
or
¤
INT
Call all
¤
OK or
. . . All registered handsets are called. You speak to the first internal participant
to pick up.
24
OK
Handset
OK
Handset
OK . . . Put into base flashes in the display, the handset has been
. . . The handset selected is called
OK
Register HS
OK
The display shows Registering.
OK
De-register HS
OK
Enter the system PIN for the base
to select an internal participant or
Enter the system
OK
Select