Making Voip Settings; Using The Connection Assistant; Changing Settings Without The Connection Assistant - Swisscom Aton CL700 IP User Giude

Making VoIP settings

Automatic firmware update
Your phone will check daily whether a
newer firmware update is available via the
Internet on the Siemens configuration
server. If this is the case, the message
New firmware available
when the handset is in idle status, and the
message key f flashes.
f
Press the message key.
Press the display key to con-
§Yes§
firm the prompt.
The firmware will be loaded onto your
phone.
Note:
If you reply to the request with §No§, the display
will not be repeated. The message
New firmware available will only be shown again
if a newer version of the firmware than the one
rejected is available.
Making VoIP settings
The connection assistant on your phone
can help you make the settings.

Using the connection assistant

The connection assistant starts automati-
cally when you set the handset and base
station up for the first time, or when you
try to connect to the Internet before mak-
ing the necessary settings.
You can also start the connection assistant
via the menu:
¢ ¢
v Ð
Settings
Connection Assist.
Select and press
~
Enter the system PIN and press
.
§OK§
For how to enter VoIP settings using the
connection assistant, see page 11.
60
will be displayed
Telephony
.
§OK§
Changing settings without the
connection assistant
You can change the VoIP user data via the
menu without starting the connection
assistant.
Entering/changing VoIP user data
The VoIP settings must also be extended
for your personal data. You will receive all
necessary data from your VoIP provider.
Note:
Please note when making these entries that
the VoIP user data is case sensitive. To enter
text see page 92.
¢ ¢
v Ð
Settings
¢
(enter system PIN)
VoIP
¢
Provider Registr.
¤
Change multiple line input:
Username:
Enter the user name (caller ID) for your
VoIP provider account. The
usually identical to your Internet phone
number.
Authent. Name: / Authent. Password:
Enter the provider-dependent access
data that has to be transferred by the
phone to the SIP service at registration.
¤
Click to save the settings.
§Save§
Telephony
Username is