Activating/deactivating
repeater mode
With a repeater you can increase the range
and reception strength of your base sta-
tion. You will need to activate repeater
mode. This will terminate any calls being
made via the base station at that time.
Precondition: a repeater is registered
with the base station.
¢
¢
v
Ð
Settings
¢
Add. Features
Repeater Mode
Select and press
Press the display key to con-
§Yes§
firm the security prompt.
Setting the default connection
You can make settings according to
whether you want to make calls via VoIP or
fixed network by default.
¢
¢
v
Ð
Settings
¢
Default Line
VoIP
/
Fixed Line
Select and press
When making calls:
¤
Press the talk key c briefly if you
want to make the call via the default
connection.
¤
Press and hold the talk key c if you
want to make the call via the other con-
nection type.
Base
(½ = on).
§OK§
Telephony
(½ = on).
§OK§
Updating the base station
firmware
If necessary, you can update your base sta-
tion firmware.
The firmware update is downloaded
directly from the Internet by default. The
relevant website is preconfigured in your
phone.
Precondition:
The base station is in idle status, i.e.:
u
No calls are being made via the fixed
network or VoIP.
u
There is no internal connection
between the registered handsets.
u
No other handset has opened the base
station menu.
Starting the firmware update manually
¢
¢
v
Ð
Settings
Software Update
Select and press
~
Enter the system PIN and press
.
§OK§
The base station establishes a connection
to the Internet or to the local PC.
Press the display key to start
§Yes§
the firmware update.
Notes:
– The firmware update can last up to 3 min-
utes.
– When updating from the Internet, checks
are made to ensure that no newer version
of the firmware exists. If this is not the case,
the operation is terminated and a message
is issued to that effect.
Base station settings
Base
.
§OK§
59
Need help?
Do you have a question about the Aton CL700 IP and is the answer not in the manual?