Network Services - Fixed Network; Functions For The Next Call; Settings For All Calls - Swisscom Aton CL700 IP User Giude

Network services –
fixed network
The following network services can only
be used for making calls via the fixed net-
work.
Network services are functions that your
network provider makes available to you.
You have to request these services from
your network provider.
¤
If you require assistance, please con-
tact your network provider.

Functions for the next call

Withhold No.
Withhold transfer of the number for the
next call (CLIR). Precondition: the 'With-
hold calling line identification on a
case-by-case basis' feature is supported
by your network provider.
¢
v ê
Sel. Services
¢
Withhold No.
~ c
Enter the number and press
the talk key.
The number is dialled via the fixed net-
work connection, regardless of whether
you press and hold or press and release
the c talk key.
The setting is reset after this call, even if
you call the dialled number again from the
last number redial list.

Settings for all calls

If you have completed one of the follow-
ing procedures, a code is sent.
¤
After confirmation from the telephone
network, press the end call key a.
You can set the following features:
¢
Fixed Line
Network services – fixed network
General call forwarding
¢
v ê
Sel. Services
¢
Call Divert
¤
Change multiple line input:
When:
Select All Calls / No Answer
Call No.:
Press the display key
number to which the call is to be
diverted, and press
a fixed network, VoIP or mobile
number.
Status:
Activating/deactivating call forwarding.
¤
Press the display key
¤
Press the end call key a after the
announcement from the telephone
network.
Activating/deactivating call waiting
If call waiting is activated, a caller on the
fixed network will hear the ringing tone if
you are already conducting a phone con-
versation using your fixed network con-
nection. This call is announced acousti-
cally and visually on your handset screen.
Calls on the VoIP connection are not
shown as call waiting. They are signalled
on other registered handsets. If no other
handset is available, the caller will hear
the busy tone.
Accepting/rejecting call waiting, see
page 24.
¢
v ê
Sel. Services
¢
Call Waiting
Status: Activate/deactivate.
¤
Press the display key
¤
Press the end call key a after the
announcement from the telephone
network.
Note:
The setting does not affect the procedure for
call waiting on the VoIP connection. For how to
activate/deactivate call waiting for the VoIP
connection, see page 23.
¢
Fixed Line
/ When Busy.
. Enter the
§Edit§
. You can enter
Save
.
§Send§
¢
Fixed Line
.
§Send§
23