Receiving An Sms - Swisscom Aton CL700 IP User Giude

SMS (text messages)
Sending SMS messages to an e-mail
*
address
If your service provider supports the SMS
to e-mail feature, you can also send your
SMS messages to e-mail addresses.
The e-mail address must be at the begin-
ning of the text. You must send the SMS to
the e-mail service of your SMS send cen-
tre.
¢
v î
Messaging
¢
(mailbox, mailbox PIN)
¢
New SMS
~
Enter the e-mail address. End
the entry with a space or colon
(depending on the service pro-
vider).
~
Enter the SMS text.
Press the display key.
§Options§
Send Select and press
Select and press
E-mail
number of the e-mail service is
not entered (page 40), enter
the number of the e-mail serv-
ice.
Press the display key. The SMS
§Send§
will be sent as soon as your
phone's fixed network connec-
tion is free.
Sending SMS messages as a fax
You can also send an SMS to a fax
machine.
Precondition: Your service provider sup-
ports this feature.
¤
You are writing an SMS (page 34).
Press the display key.
§Options§
Send Select and press
Select and press
Fax
* is currently not supported in the Swisscom
network.
36
¢
SMS
.
§OK§
If the
§OK§
*
.
§OK§
.
§OK§
s / ~
Select the number from the
directory or enter it manually.
Enter the number with dialling
code (even if you are in the
same area).
Press the display key. The SMS
§Send§
will be sent as soon as your
phone's fixed network connec-
tion is free.

Receiving an SMS

All received SMS messages are saved in
the incoming message list. Linked SMS
messages are displayed as one message. If
this is too long (it consists of more than 8
linked individual SMS messages) or if it
was not fully transmitted, it will be split
into several individual SMS messages.
Since an SMS remains in the list even after
it has been read, you should regularly
delete SMS messages from the list.
The display tells you if the SMS memory is
full.
¤
Deleting SMS messages you no longer
require (page 37).
Incoming message list
The incoming message list contains:
u
All received SMS messages, starting
with the most recent
u
SMS messages that could not be sent
due to an error
u
SMS status messages, if the status
report is activated (page 35).
New SMS messages are signalled on all
Aton CL300 V2 handsets by the À icon in
the display, the flashing message key f
and an advisory tone and a ringtone.
Note:
* The first ringtone can be deactivated
(page 56).