Making Settings For Voip Telephony - Swisscom Aton CL700 IP User Giude

Making settings for VoIP
telephony
Before you can use the Internet (VoIP) to
phone any other users on the Internet, the
fixed network or the mobile phone net-
work, you need the services of a VoIP pro-
vider who supports the VoIP SIP standard.
Note:
The device only functions via "Bluewin"
(Swisscom VoIP provider).
All VoIP settings are preset at the factory.
You only need to enter the user ID and
password. These can be obtained from
"Bluewin".
Precondition: you have registered with
"Bluewin" (e.g. via your PC) and set up at
least one VoIP account.
The following phone settings are neces-
sary in order for you to use VoIP. You will
receive all information from "Bluewin".
u
Your registration name
u
Your password with the VoIP provider
The connection assistant will help you
with the settings.
Starting the connection assistant
Precondition: The base station is con-
nected to the mains power supply and a
router. Your router is connected to the
Internet (page 10).
Tip: If VoIP is activated as the default con-
nection for your phone (default setting
page 59), the phone will attempt to make
a direct connection to the "Bluewin" server
after the connection assistant is closed.
If incorrect/incomplete information
means that the connection cannot be
established, messages will be displayed
(page 12).
Note:
Your phone is preconfigured for dynamic
assignment of the IP address. In order for your
router to 'recognise' the phone, dynamic IP
address assignment must also be activated on
the router, i.e. the router's DHCP server is acti-
vated. Turn to page 61 to find out how to
assign your phone a static IP address if neces-
sary.
As soon as the handset battery is suffi-
ciently charged, the message key f on
the handset will flash (around 20 minutes
after you have put the handset in the
charging cradle). Press the message key
f to start the connection assistant.
You will see the following display:
Connection Assist.
Start assistant
for entry of VoIP
connection data?
No
Press the display key to start
§Yes§
the connection assistant.
~
Enter the system PIN (default
is '0000').
Note:
The connection assistant will also start auto-
matically if you try to establish a connection
via the Internet, before you have made the
necessary settings.
You can also call up the connection assistant
at any time via the menu (page 60).
First steps
Yes
11