Timer; Setting Procedure - Siemens HC744540 Instruction Manual

Timer

Setting procedure

When the time has elapsed
Changing the timer
duration
Cancelling the setting
The timer and cooking time
count down at the same
time
You can use the timer as a kitchen timer. It runs
independently of the oven.
The timer has a special signal. This means that you
can tell whether the timer duration or the cooking time
has elapsed.
You can also set the timer if the childproof lock is
active.
1. Press the S Timer button.
The S symbol flashes.
2. Use the - minus or + plus button to change the
timer duration.
+ button default value = 10 minutes
- button default value = 5 minutes
The timer starts after a few seconds. The S
symbol lights up in the display. You will see the
time counting down.
A signal sounds.
Press the S Timer button. The timer goes out.
Press the S Timer button. Use the + or - button to
change the time.
Press the S Timer button. Press the - button until
zero is shown on the display.
Both symbols light up. The timer duration starts
counting down in the display.
To call up the remaining x Duration, y End time or
0 Clock: Press the 0 Clock button repeatedly until
the relevant symbol appears.
The value you are checking appears for several
seconds on the display.
33