Frequently Asked Questions - Sub-Zero 601R Use & Care Manual

600 series over/under; side by side; with glass door; with ice & water dispensing refrigerators
Table of Contents

Advertisement

T
roubleshooting
roubleshooting
Frequently Asked
Questions
Ice Production
NOTE: Always make sure the
power is ON for your icemaker.
Look at the upper display panel
for ICE ON/OFF.
Always dispose of the first
several buckets of ice produced
to ensure pipe residue or other
particles associated with newly
hooked up water lines are not
consumed.
Q:
My ice maker isn't producing
very much ice.
A:
Your unit will typically
produce eight cubes every 2 to
2-1/2 hours.
Q:
My ice is freezing together
and clumping.
A:
You may need to discard the
ice and allow supply to be
replenished.
26
Q:
My ice tastes funny and is
discolored.
A:
Our products do not have an
in-line filtration system built into
the water and ice dispenser.
Please contact a plumber in your
area to discuss filtration options
available to you.
Temperature
NOTE: Always make sure the
power for your unit is ON. Look
at the upper display panel for
ON/OFF button.
Q:
How do I adjust the
temperatures in my unit?
A:
Please refer to page 13 for
detailed instructions on how to
adjust the temperatures.
Q:
What are the suggested
settings for my unit?
A:
The refrigerator compartment
at 38˚F (3˚C). The freezer
compartment at 0˚F (-18˚C).
G
G
uide
uide
Q:
I'm experiencing some
condensation on the outside and
inside of my unit.
A:
In higher humidity climates,
condensation will form and is
considered normal. Leaving the
door open for longer periods of
time may also contribute to
condensation inside your unit.
Q:
My unit isn't cooling
properly.
A:
Please refer to page 21 for
detailed instructions on how to
vacuum the condenser.
Noise
Q:
Why do I hear my unit
running?
A:
It is normal to hear the
operation of fans and motors.
Sounds will be accentuated
based on the placement of the
unit and overall room design.
Door Operation
Q:
Why is my door hard to open?
A:
Your unit was designed for an
airtight seal. A vacuum pressure
will form after the door is closed.
Wait several seconds for the
pressure to equalize before re-
opening the door.
Q:
My door is opening too
fast and hitting my wall or
surrounding cabinets.
A:
Refer to page 20 for informa-
tion on a door stop for your unit.
The speed of your door opening
and closing may also be affected
by any door alignment issues.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

601rg601f611g611650650g ... Show all

Table of Contents