Connecting Additional
Equipment
Connecting a TV and VCR
Rear of TV
...................................
Audio R (red)
.....................................
Audio
L (white)
.....................................
Video (yellow)
1
2
Connect the coaxial cable from your TV antenna
or cable service to the IN jack on your
VCR.
Connect a coaxial cable (not supplied)
from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
Optional connection
If your VCR is equipped
with video outputs,
you can get better picture quality by
connecting
audio/video
cables (not supplied)
from AUDIO/VIDEO
OUT on your VCR to
AUDIO/VIDEO
IN on your TV.
For better picture quality, use S VIDEO instead
of the yellow video cable. S VIDEO does
not provide
sound, so you still must connect the audio cables.
Usingyour TV with this connection
Program
your Sony remote control to operate
your VCR (see "Programming
the Remote
Control"
on page 11).
VCR/DVD
To activate your remote, press the
c:D FUNCTION button to operate your VCR. In order to do
this, first program
your remote control, then use the Ch_lnel
Fix feature to set your TV to
ch_lnel 3 or 4 (see page 41).
Press _
repeatedly
to switch between VCR input (VIDEO input) and VHF/UHF
(local channels).
17