Connecting Additional Equipment - Sony TRINITRON KV-29FV16 Service Manual

Connecting Additional Equipment

TV and VCR
2
VCR
1
From
cable/
antenna
3 (Optional connection)
1
Connect the coaxial cable from your TV antenna or cable service to
the IN jack on your VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF jack on the TV.


To watch video programs from your VCR, tune your TV to channel 3 or 4 (as
set on the rear of your VCR).
(Optional connection)
3
If your VCR is equipped with video outputs, you can get better
picture quality by connecting A/V cables (not supplied) from
AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on
your TV.


For optimum picture quality, use S VIDEO instead of the yellow A/V cable.
S VIDEO does not provide sound, the audio cables must still be connected.


You can use the button to switch between the VHF/UHF and VIDEO
inputs.
Connecting Your TV
Rear of TV
5
Operating Instructions
TV and Cable Box
Cable Box
1
From
cable
2
1
Connect the coaxial cable from your cable service to the IN jack on
your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
cable box to the VHF/UHF jack on the TV.


To view channels from your cable box, tune your TV to channel 3 or 4 (as set
on the rear panel of your cable box) and use the cable box's remote control to
change channels.


If you will be controlling all channel selection through your cable box, you
should consider using the Channel Fix feature, (see page 26).
6
Rear of TV