Sony FD Trinitron WEGA KD-32FS130 Operating Instructions Manual page 23

Connecting a TV, VCR, Cable/Antenna, and Satellite Receiver
using Composite Video (VIDEO/AUDIO L(MONO), R)
From •
cable or _
2
Optional
antenna_
Splitter
Satellite antenna _J
cable
3a
3b
For Viewim
Satellite receiver
Rear of TV
6
For Viewing
5 For Playback
Video (yellow)
Audio L (white)
Audio R (red)
4
5
6
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
Connect the single input jack of the splitter (not supplied) to your incoming cable/antenna
(optional connection to view local channels or broadcast).
Using coaxial cables (not supplied), connect the two output jacks of the splitter
(not supplied) to:
a) the IN jack on your satellite receiver
b) the VHF/UHF jack on the TV
Using a coaxial cable (not supplied), connect the OUT jack on your satellite receiver to the
VHF/UHF IN on your VCR.
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.
Usingyour TV with this connection
Program your Sony remote control to operate your VCR or satellite receiver (see
"Programming the Remote Control" on page 11).
VCR/DVD
To activate your remote, press the
c:D FUNCTION button to operate
your VCR or the
SA_LE FUNCTION
button to operate your satellite receiver.
Press _ repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).