Sony FD Trinitron WEGA KD-32FS130 Operating Instructions Manual page 19

Connecting a TV and Cable Box
Some cable TV systems use scrambled or encoded signals that require a cable box to view all
channels. If you subscribe to such type of service, use this connection.
1
From cable/
antenna
Cable box
....
OUT
Rear of TV
1 Connect the coaxial cable from your cable service to the IN jack on your cable box.
2 Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the
VHF/UHF jack on your TV.
Using your TVwith this connection
Program your Sony remote control to operate your cable box.
To activate your remote, press the SA_:_LE F UNCTION button to operate your cable box. Then
use _)-(_) buttons or CH+/-buttons to change the channels. In order to do this, first program
your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see
page 41).