Sony FD Trinitron WEGA KD-32FS130 Operating Instructions Manual page 24

Connecting a TV, VCR, and Satellite Receiver using
Component Video (Y PB PR)
From
cable/
antenna
4
Rear of TV
Video (yellow)_ _
Audio L(white) _ I_f_
Audio R(red) %L_
Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite
receiver.
1
2 Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3 Using a coaxial cables (not supplied), connect the OUT jack on your VCR to the
VHF/UHF jack on your TV.
4 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your VCR.
5 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
6
Using component video cables (not supplied), connect Y P_ PR OUT on your satellite
receiver to Y PB PR IN on your TV.
7 Connect AUDIO OUT on your satellite receiver to AUDIO IN on your TV.
Usingyour TV with this connection
Program your Sony remote control to operate your VCR or satellite receiver (see
"Programming the Remote Control" on page 11).
Turn on your VCR to enable your satellite receiver to work with this connection.
VCR/DVD
To activate your remote, press the c:D FUNCTION button to operate your VCR or the
SA_4_LE FUNCTION
button to operate your satellite receiver.
Press _ repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
23