Sony FD Trinitron WEGA KD-32FS130 Operating Instructions Manual page 20

Connecting a TV, VCR, and Cable Box
._ DIGITAL CABLE BOX USERS: If You are COnnecting a digital cable boX, you will need a Special bi_
directional splitter (5_900 Mhz minimum) that isdesignedto work with your digital cablebox.
Use this connection if you subscribe to a cable system that scrambles some channels (pay
channels), but not all of them. This setup allows you to:
change channels through your cable box or VCR when you are receiving a
scrambled signal
change channels through your TV
Rear of TV
Splitter r--_
ooT ....
Cable 2a ! _ OUT
1
. ___Video (yellow)
4 _ _Audio L (white) I
_Audio R (red)
Connect the single input jack of the splitter (not supplied) to your incoming cable
connection.
2 Using coaxial cables (not supplied), connect the two output jacks of the splitter
(not supplied) to:
a) the IN jack on your cable box
b) the VHF/UHF jack on the TV
3 Using a coaxial cable (not supplied), connect the OUT jack on your cable box to the IN jack
on your VCR.
4 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
5 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your cable
box to AUDIO/VIDEO IN on your TV.
19
Cable box