Connection; Your Receiver - Strong SRT 55 User Manual

PART 1 • English
Power on with last viewed channel
n
User-friendly remote control
n
NTSC/PAL converting automatically and manually
n
3 Games (Tetris, Snake, Othello)
n
Support of active antenna by 5 V output
n
* Depending on local signal conditions
** Availability depending on broadcaster
*** STRONG cannot guarantee the playback of external video files, which have not been recorded by this device
Accessories:
1 User Manual
n
1 Remote control unit with 1 Battery (coin cell 3 V)
n
1 Infrared eye
n
1 Power adapter
n
Note: The batteries should not be recharged, disassembled, electrically short-
circuited or be mixed or used with other types of batteries.
If rechargeable accumulators instead of batteries are going to be used, we
recommend using (e.g. NiMH) types with low self-discharge to ensure
long time operation of remote control.

2.0 CONNECTION

Connecting to TV, Terrestrial Antenna, IR Eye and Main Power
To receive the broadcast signal, the terrestrial antenna cable should be connected to
the ANT IN connector at the receiver. Then connect the IR connector into the receiver
and make sure it is properly connected to the IR sensor input. Afterwards you can plug
the power adapter to the main power source. After all connections are established
carefully, the IR eye LED must light, otherwise the Remote Control will not react.
Connecting to TV and VCR
Connecting to DVD Recorder
Connecting to a Projector
Connecting to a Hi-Fi device

3.0 YOUR RECEIVER

1. SCART PORT
2. SD Card reader
3. ANT IN
4. IR Sensor slot
5. DC IN
To connect to your TV set.
To insert your SD card.
To connect an antenna for reception of broadcasting signal
(support antenna power 5 V DC).
To connect IR eye plug
To connect the power adapter plug (5 V DC/1 A).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
5