Strong SRT 55 User Manual page 13

5.3.3 Region and Time
Here you can set your region and time zone.
Region:
GMT Usage:
GMT Offset:
Date/Time:
Time Display:
5.3.4 Timer Setting
In this menu you can set a programme timer or sleep timer.
Programme timer
Timer Number:
Timer Mode:
Timer Service:
Wake-up Channel:
Month/Date/Day:
Time:
Duration:
Auto Record:
Record Duration:
When you want to quit programme timer, a saving window appears, with tu select
Yes in the confirmation window and press OK to save or select No to cancel.
Sleep Timer
You can set the receiver to switch to Standby in 10 min, 30 min, 60 min, 90 min and
120 min automatically. Additionally there is shown the value of time Remains: HH:MM
5.3.5 OSD Setting
This menu allows you to change settings for: Subtitle Display, OSD Transparency, and
Load Default OSD Setting.
Subtitle Display:
OSD Transparency: To set the OSD transparency from Off ~ 50 %.
OSD Timeout:
Load Default OSD Setting:
10
This menu is used for changing the region setting.
This menu is used for usage of GMT.
The options are: Off / User Define / By Region
This menu is valid only when selected "User Define" in GMT Usage
menu. The GMT offset range is "-11:30 ~ +12:00", increasing by
half hours progressively.
"Date" and "Time" menus are valid only when selected "Off" in
GMT Usage menu. Press OK then numeric button to change the
date and time.
This menu allow to control whether the time is displayed on
screen or not. The options are: Off/On.
You can set 8 timers
Off/Once/Daily/Weekly/Monthly
TV Service/Radio Service
You can select a desired channel as wake-up channel.
Press pq buttons to select your desired month, date and day.
Press OK to input the time with the numeric buttons.
Press OK to input desired duration with the numeric buttons.
Use the tu buttons to adjust On or Off, depending if you want
Timer to activate recording via SD Card.
Only activated for recording. Press OK to input desired duration
with the numeric buttons.
To set the subtitle to DVB, Teletext or OFF.
To set the wanted duration for banner display from 3 s ~ 10 s.
To clear all OSD settings and reset to default value.
PART 1 • English