Picture Save Destination (Cards And Built-In Memory); Remaining Battery And Memory Capacity - Panasonic Lumix DMC-TZ5 Operating Instructions Manual

Preparations

Picture save destination (cards and built-in memory)

Pictures will be saved to a card if one is inserted, or to the built-in memory
Compatible memory cards (sold separately)
The following SD standard-based cards (Panasonic brand
recommended)
• SD memory cards (8 MB - 2 GB)
• SDHC memory cards (4 GB - 16 GB)
Can only be used with devices compatible with SDHC
memory cards.
• Cards of over 4 GB may only be used if they have the SDHC
logo.
Always format cards with this camera. (P.27)
If the switch on the card is set to 'LOCK', operations such as formatting, recording, and
deleting cannot be performed.
MultiMediaCards may also be used (for still pictures only)
Built-in memory (approx. 50 MB)
Internal memory is slower than SD memory card.
Clipboard pictures (P.64) are saved to built-in memory.
Pictures may be copied between cards and the built-in memory (P.80).
Pictures remaining
(P.100)
When in operation
(Card) or
This means that an operation is in progress, such as the recording, reading, or deleting
of pictures. Do not turn off the power or remove the battery, card, or AC adaptor (DMW-
AC5PP, sold separately) (this may cause damage to or loss of data).
It is recommended that you copy important pictures to your computer (as
electromagnetic waves, static electricity, or faults may cause data to be damaged).
For model numbers and types,
see http://panasonic.co.jp/pavc/global/cs (This Site is English only.)
Downloaded From camera-usermanual.com Panasonic Manuals
18
VQT1P79
2
Inserting battery and card
(Continued)

Remaining battery and memory capacity

Remaining battery (only when using battery)
10 10
(Status indicator flashes when LCD monitor is off)
Recharge or replace battery (P.16).
Displayed when no card inserted (pictures will be saved to built-in memory)
(Built-in memory) are illuminated red.
SDHC memory card
Switch
(LOCK)
(flashes red)
if not.
SDHC logo