Sharp UX-A450 Operation Manual page 90

Messages and Signals
LINE ERROR
MEMORY IS FULL/
SEE MANUAL
(alternating messages)
MEMORY PRINTING
NO DATA
OFF HOOK
ON HOOK DIAL
OVER HEAT
PRINT HEAD FAIL/
YOU NEED SERVICE
(alternating messages)
READY TO SEND
88
Transmission or reception was not successful. Press
the STOP key to clear the message and then try
again. If the error persists, see Line Error on page 83.
The memory is full. You may have too many
messages recorded in the answering machine. To
erase messages, see page 30.
This may occur during fax reception if too much data
is received before the pages can be printed out. If
faxes have been received to memory because
printing is not possible (an additional message will
indicate the problem), resolve the problem so that
printing can continue (see Substitute Reception to
Memory on page 66). If you are attempting to
transmit from memory, see If the memory becomes
full on page 57. If you are copying, see If MEMORY
IS FULL appears on page 67.
The fax is preparing to or printing out a document
from memory.
This appears if you attempt to search for an auto-dial
number when none have been stored.
This appears if you forgot to replace the handset after
using it to dial and send a fax. Replace the handset or
press the STOP key to clear the message.
The key has been pressed and the fax machine is
waiting for you to dial.
The print head has overheated. Operation can be
continued after it cools. If overheating frequently
occurs, try changing the print contrast setting to
LIGHT (see page 16).
The print head has failed and requires service.
A document has been loaded and the fax machine is
waiting for you to begin faxing or copying.