Connecting An External Hard Drive - Medion PC Manual

Connecting an external hard drive

Diagram reference: A
Your PC has a hard disk bay, which will enable you to connect the external
MEDION HDDrive 2go ultra speed hard drive simply and without complica-
tions via the SATA connection.
As in the case of a USB memory pen, connection takes place with a restarted oper-
ating system. The hard drive will be recognized as a replacement storage medium
and will be allocated a drive letter automatically.
Note
Please take note of the fact that only the MEDION Hard Drive
specified above can be connected to the hard disk bay.
The HHDrive 2go (connection via USB) of the first generation can
only be connected with a special adapter.
As soon as you attach the hard disk to the hard disk bay, this is recognized as the
removable data carrier of your PC. If you don't access your MEDION HDDrive
2go ultra speed for a long period of time (approximately 10 minutes), it goes
into the energy savings mode, in order to not bring about the unnecessary con-
sumption of electricity.
Important!
The plugs are provided with dust protection caps to protect the
connections. They must be removed before use. The caps must be
replaced under all circumstances, if the connections are not used.
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
- 34 -